Laserfiche WebLink
INJECTION NVELL- SPECIFIC REQUIREMENTS <br />Well Name: 13PI -I <br />EPA Well ID Number: C030358 -08417 <br />Prior to Commencing Injection Operations. the permittee shall submit the following information: <br />1. Completed SA'ell Completion Report (EPA Form No. 7520 -9) and schematic diagram. <br />2. Summary of daily drilling activities. <br />3. Depth to the top of each formation or unit encountered and any water quality or other <br />pertinent data that is collected. <br />4. Gamma Ray Log (GR), Caliper Log (CAL), Spontaneous Potential (SP) /Resistivity Log <br />5. Cement Bond Log (CBL) or Cement Evaluation Log <br />6. A successful Part I (internal) Mechanical Integrity Test (_N41T) <br />7. Temperature Survey <br />8. AOR well:liH -R <br />a. <br />Well completion report <br />b. CBL <br />9. Subsurface Subsidence Monitoring `jell: The DS -5 will serve to monitor substn-face <br />subsidence and baseline data is required. <br />10. Surface Subsidence 1Vlonitoring `Fell: 131-1 SSM will be placed. <br />The permittee shall include appropriate narrative interpretations by a knowled„ eable lour analyst <br />along with pertinent logs. Once these records are received and approved by EPA, the Director <br />will provide written authorization to inj ect. <br />Under< =roLind Sources of Drinking Water (USD)Ys) <br />Starting from the ground surface, USDWs in the Area Permit are: a perched or unconfined <br />discontinuous low permeability sandstone aquifer approximately 400 feet below surface, the 16 <br />feet thick A- Groove Aquifer, and the 290 feet thick B- Groove Aquifer. <br />Aquifer Exemption is not required in the Dissolution Surface Zone because the TDS of water <br />produced from the proposed injection well is greater than 10,000 ma /l. The L -5 zone <br />immediately over the Dissolution Surface has been exempted. <br />Approved Injection Zone <br />Injection is approved below the Dissolution Surface, in the L -5 zone which comprises the Boies <br />Bed (L -5A), L -5B, L -5C, and L -5E zones. <br />Confining Zone <br />The R -6 zone aquitard which lies directly above the L -5 zone, has been designated as the <br />confining interval. It is approximately 177 feet of marlstone, oil shale. and leached oil shale <br />between the depths of approximately 1600 ft and 1775 ft. <br />Maximum Allowable Injection Pressure (MAIP) <br />The MAIP is 300 psi a as measured at the surface. <br />A11thorization fir Additional 11'ell: UIC Area Permit 0030358 -00000 <br />ff'ell: 13H -1 EPA 1 "ell ID: C030358 -08417 Pate 2 of <br />