Laserfiche WebLink
• <br />amec <br />F. Where pipe sleeves, inserts, and anchors prevent placement of reinforcing bars in the locations shown, <br />additional reinforcing shall be required, in locations as approved by CERTIFYING ENGINEER. <br />G. Reinforcing bar splices shall be used only in the locations shown on the DRAWINGS. <br />H. Welded splices shall not be permitted. <br />1. The length of lap for reinforcing bars shall be in accordance with ACI 318, unless otherwise shown. <br />*** END OF SECTION *** <br />• <br />0 <br />Section 03220 Page 2 of 2 <br />Reinforcing Steel <br />SAProjects\1125 CC&V Phase 5 VLF\I - Tech Specs\Arequa IFC Specs\03220.r0.doc <br />September 3, 2008 <br />Revision 0