REP50584

• Permit No: M1988112
• IBM Index Class Name: Report
• Doc Date: 2/1/1992
• Doc Name: INSTRUMENT LOG-JANUARY 1992
• Media Type: D
• Archive: No

all the wires. ~t the Chromalox temperatt~ controller
ready for shipm
3) Ordered several items and resolved a minor ordering
problem with Allen-Bradley.
- ordered a ball valve for valve 208.
- ordered new Allen - Bradley control panel power supply.
*as soon as it is in I'll return the Allen-Bradley control
panel kit.
4) Joel asked me to make out a work order for water
protection on the tails HCN detector.
1/13/92
1) Worked on 413 inter-tank screen, the breaker tripped for
no apparent reason. The screen was not able to work off the
hand station in manual (may have something wrongg with the
Allen-Bradley switch or some relay used for lockin), however
I was able to get it to run off of the PLC.
2) organized and cleaned my desk and shelves in office.
3) Worked on organizing the Mill warehouse. Finished a
four foot shelve and placed all the westing house parts on
it. Started separating the parts associated with specific
items.
4) Helped Larry and Ed blast feeder 3.
5) Helped Larry clean up the Shop.
1/15/92
1) Helped Paul with the air gas mixture for the Boiler.
2) sweeper out the ware house and in my office.
3) Called people at Chromalox check on the Chromalox I had
just sent in. Found out that they want to charge me for a
new unit.
4) Worked and getting the specifications for the broken
security camera cable. Got the specifications for ordering a
new cable and filled out a requisition.
1/15/92
1) Talked with the Omega Technician on ordering new temp.
controllers for the Sag and.Ball mill gear boxes. He
suggested I get an inexpensive relayed controller/indicator.
I read through the specs on it and decided on ordering it.
-NEMA 4 front panel
-front panel programmable.
2) Worked on etting the wiring diagrams for the Nalco pump
so as to send i~ a 4-20 MA consoling signal.
3) Helped Operations with a plugged Sag chute.