Laserfiche WebLink
<br />1 <br /> <br /> <br /> <br /> <br />1 <br /> <br />1 <br /> <br /> <br /> <br /> <br />1 <br />1 <br /> <br />1 <br /> <br />Kvaerner Metals Project No. 306900 <br />General Specification No. GC-18 <br />Geosynthetic Lining <br />D 1603-94 Standard Test Method for Carbon Black in Olefin Plastics <br />D 1693-97 Standard Test Method for Environmental Stress-Cracking of <br />Ethylene Plastics <br />D 1777-96 Standard Method for Measuring Thickness of Textile Materials <br />D 3015-95 Standard Practice for Microscopical Examination of Pigment <br />Dispersion in Plastic Compounds <br />D 3083-89 Standard Specification for Flexible Polyvinyl Chloride Plastic <br />Sheeting for Pond, Canal and Reservoir Lining <br />D 3776-96 Standard Test Methods for Mass per Unit Area (weight) of Fabric <br />D 3786-87 Standard Test Method for Hydraulic Bursting Strength of Knitted <br />Goods and Nonwoven Fabrics <br />D 4218-96 Standard Test Method for Determination of Carbon Black Content <br />in Polyethylene Compounds by the Muffle-Furnace Technique <br />D 4632-91 Standard Test Method for Grab Breaking Load 2nd Elongation of <br />Geotextiles <br />D5034-95 Standard Test Method for Breaking Strength and Elongation of <br />Textile Fabrics (Grab Test) <br />E 96-95 Standard Test Methods for Water Vapor Transmission of Materials <br />2.3 Federal Test Method Standards (FTMS) <br />2.4 National Sanitation Foundation (NSF) <br />3.0 MATERIALS <br />Specific makes and catalog numbers of the various items of materials and equipment <br />included in this specification are to establish a minimum acceptable quality for the items. <br />Items of equal quality by other manufacturers may be supplied when approved by the <br />Engineer, not less than 30 days prior to the purchase of products. <br />All materials shall be new and shall conform to the applicable following requirements, <br />unless noted otherwise on the drawings: <br />3.1 HDPE Liner <br />High density polyethylene liner shall be of first quality product, designed and <br />manufactured specifically for the purpose of liquid containment and shall have <br />J W69\VJPl9PEC\9TRUCTGL185PC DOC. Rsv ~0~ 4 Pnnletl June ]. 1999 <br />