Laserfiche WebLink
<br />1 <br /> <br />1 <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />r <br /> <br /> <br /> <br />1 <br />r <br />TABLE 4-3 <br />ESTIMATED PRODUCTION RATE <br />(TONS OF RAW COAL) <br /> <br />1991 1,130,000 - 1,130,000 <br />1992 1,130,000 - 1,130,000 <br />1993 1,260,000 - 1,260,000 <br />1994 1,260,000 - 1,260,000 <br />1995 1,260,000 - 1,260,000 <br />1996-2000 ,300,000 - ,300,000 <br />..001-2005 ,224,228 75,772 ,300,000 <br />006-2010 ,566,219 1,733,781 ,300,000 <br />..011-2015 - ,300,000 ,300,000 <br />.,016-2020 - ,300,000 ,300,000 <br />021-2025 - ,300,000 ,300,000 <br />026-2030 - ,300,000 ,300,000 <br />031-2032 - 1,544,799 1,544,799 <br />4.2.7 Recovery Factors Recovery factors vary among different main and gate roads, room-and-pillaz <br />panels and longwall panels. <br />Only 36 to 39 percent of coal is recovered from the main or gate roads depending upon the numbers <br />of entries being developed. The higher the number of entries, the lower the recovery factor will be. <br />A three-entry gate road renders to a 39 percent recovery factor. This factor is 36 percent for a <br />six-entry main road. <br />In the room-and-pillaz panels, the final recovery, i.e. the ultimate pillaz size that can be safely <br />extracted, depends upon the overburden thickness and the seam thickness. The recovery factor decreases <br />with increasing overburden and/or seam thickness. In the Deserado Mine, this factor is estimated at 64 <br />percent. <br />27 <br />1 <br />