PERMFILE117376

• Permit No: C1992081
• IBM Index Class Name: Permit File
• Doc Date: 6/19/2006
• Doc Name: Chemical Labels
• Section_Exhibit Name: Tab 20 Attachment 20-1B
• Media Type: D
• Archive: No

SPEC1NfEN LABEL UPDATES AVAILABLE AT WWW.GREENBOOK.NET 2
rows, non-irigation dimhbanks, and around fans buildings, and CRP acres. A
non-ionic surfactant cleared for use on growing crops at the manufacturer's rec-
ommended rate is recommended for all applications of this product Use a higher
recommended rate of surfacmnt in the spray mixture whrn applying Tower spiny
volumes per acre.
General Use PrecauHans and Restrictions
Maximum Application Rate: Do not apply more than 4 pints per acre of
Redeem R&P per amual growing season (1.125 16 ac of triclopyr plus 0.375 Ib
ae of clopyralid).
)n California and Florida, the maximum use rate is 2$ pints (0.75 16 ae triclopyr,
0.25 Ib ae clopyrelid) per acre per annual use season.
Chemigatioo: Do not apply this product through any type of irrigation system.
Rotation [o Broadleaf Crops: Do not plant broadleaf crops such as tobacco,
cotton, soybeans, sunflower, clover, alfalfa, and many others in treated areas until
an adequately sensitive bioassay shows that clopyralid is no longer detectable in
the soil.
Field Bioassay Instructions: in fields previously treated with this product, plant
short test rows of the intended rotational crap across the original direction of
application in a manner m sample field conditions such as soil texture, soil pH,
drainage, and any other variable that could affect the seed bed of the new crop.
Field bioassay at any time prior to planting of the intended rotational crop. Observe
the test crop for herbicidal activity, such as poor stand (effect on seed germination)
chlorosis (yellowing), and necrosis (dead leaves or shoots), or stunting (reduced
growth). If herbicidal sympmms do not occur, the test crop can be grown If
there is apparent herbicidal activity, wait one year before repeating bioassay or
plant a crop mlerant to dopyralid such as barley, counts (rapeseed), grasses, field
coin, oats, sugar beets, or wheat.
Do mot contaminate water intended for irrigation ar domestic purposes: To
avoid injury to crops or other desirable plants, do not treat or allow spray drift to
fall onm banks or bottoms of irtigation ditehes or other channels that catty water
that may be used for irrigation purposes.
Tank Mixtures: Observe label of other products used in tank mixtures and follow
all applicable label recommendations.
Do not spray pastures if injory to existing forage legumes or other desirable
broadleaf plaota cannot be tolerated. This product caul injure or kill legumes
and most other broadleaf plants. However, the smnd and growth of esmblished
perennial grasses is usually improved after treatment, especially when rainfall is
adequate and grazing is deferred.
Do not apply to desirable legume species with exposed roots or suckers such
as pod bearing plants like acacia, locust, mimosa, redbud, or mesquite.
Established grasses are tolerant to this product, but newly seeded grasses
may be injured until well established as indicated by tittering, developmrnt of e
secondary root system, and vigorous growth.
Do not use on smooth brome grass grown for seed.
Grazing and Nayiag Restrictions
Grazing or harvesting green forage:
I) lactating dairy animals: Do not guru or harvest green forage from bested
area for 14 days after treatment
Z) Other Livestock: No grazing restrictions.
Haying (harvesting of dried forage):
1) Lacmting dairy animals: Do not harvest hay until the next growing season.
2) Other Livestock: Do not harvest hay far 7 days after treatment.
Slaughter Restrictions:
Withdrsw livestock from grazing treated grass or consumption of Heated hay at
least 3 days before slaughter. This restriction appliesm grazing during the season
of treatment or hay harvested during [he uason of treatment.
Do not transfer livestock from treated grazing areas (or feeding of treated
hay) te sensitive broadleaf crop areas without first allowing 7 days of grazing
on an untreated pasture (or feeding of untreated hay). If livestock are transferred
within less than 7 days of grazing untreated pasmrc or eating untreated hay, urine
and manure may contain enough clopyralid te cause injury m sensitive broadleaf
plants.
Crazing poisonous plants: Herbicide application may increase palambility of
certain poisonous plants. Do not graze treated areas until poisonous plants are
dry and no longer palamble to ]ivesmck.
Do not apply this product with a mistblower.
Avoiding Injury to Non-target Plants
This product can affem susceptible broadleaf plants directly through foliage and
indirectly by root uptake from treated soil. Therefore, do not apply this product
directly to, or allow spray drib to come into concoct with vegetables, ornamentals,
various susceptible broadleafcrops, or othersuscepnble desimblenon-targetplants.
Small areas of new legume seedlings should be established prior to seeding more
extensive areas in order to determine if phymtoxic residues are present in the soil
of previously bested areas at levels that could inhibit legume establishment.
Do not use plant materials from treated areasor manure from animals grazing
treated areas for composting or mulching of desirable susceptible broadleaf
plants or apply such materials to land used for growing broadleaf crops,
ornamentals, orchards, or other suscepfible desirable plants. Plant materials
or manure may contain enough dopymlid m cause injury to susceptible plan[
species.
Residues in Plants or Manure: Do not use plant residues, including hay or
straw from treated areas, or manure from animals that have grazed or consumed
Database and format copyright ©by C&P Press. All rights reserved.
forage from treated areas for composting or mulching where susceptible plants
may be grown the following season. Do not spread manure from animals that
have grazed or consumed forage or hay from treated azeas otr land used for
' growing susceptible broadleaf crops. To promote herbicidal decomposition, plant
residues should be evenly incorporated or burned. Brcakdawm of clopyralid in
crop residues or manure is more rapid undo warm, moist soil conditions and may
be enhanced by supplemental irrigation.
Avoid Spray Drill
Avoid spray drift since very small quantities of the spray, which may not be
visible, may severety injure susceptible crops during active growth or dormant
periods. Use coarse sprays m minimize drift. Ta aid in further reducing drift, a
drift wntrol or deposition agent suimble for agricultural use may be used with this
product. If used, follow all use recommendations and precautions on the product
label.
Ground application: With ground equipmene, spray drift can be lessened by
keeping the spray boom as low as possible; by applying 10 gallons or more of
spray per acre; by keeping the operating spiny pressures at the manufacturer's
minimum recommended pressures for the specified nozzle type used (]ow pressure
nozzles arc available from spray equipment manufacturers); and by spraying when
the wind velocity is ]ow (Follow smte regulations). Avoid application under
completely calm conditions which may be conducive m a'n inversion. In hand-
gun applications, select the minimum presmre required to obtain adequate plant
coverage without forming a mist. Do not apply with a mist blower.
Aerial application: With aircraft, drift can be lessened by using straight stream
nozzles directed straight back; by using a spray boom no longer than P, of the
rotor or wing length of the avcmft; by using drift control systems or drift control
additives, and by keeping spray pressures low enough m provide coarse spray
droplets. Do not use a thickening agent with the Microfoii or the Thm-Valve
booms, or other systems which cannot accommodate thick sprays. Spray only
when the wind velocity is low (Follow state regulations). Avoid calm conditions
which may be conducive m etr inversions.
Do not apply by aircraft when an air temperature inversion exists: Such a
condition is characterized by little or no wind and with lower air temperature
near the ground than at highs levels. The use of a smoke device on the aircraft
or continuous smoke column at or near the she of application will indicate air
dhcton and velocity, and whether a temperature inversion is present, as indicated
by horizontal layering of the smoke.
Sprayer Clean-0ut
7o avoid injury to desirable plants, equipment used m apply Redccm R&P should
be thoroughly cleaned before reusing to apply any other chemicals.
]. Ainx and flush application equipment thoroughly after use at least three rimes
with water Dispose of rinse water ninon-cropland area away from water
supplies.
2. During the ucond rinse, add 1 qt of household ammonia for every 25 gals
of water. Cimulate the solution through the entire system so that all internal
surfaces are contacted (I 5-20 minutes). Let the solution stand for several hours,
prefembty overnight.
3. Flush the solution out of the spiny rank through the boom.
4. Rinse the system twice with clean water, recirculating and drzining each dine.
5. Remove nozzles and careens and clean separately.
Spray Drift Management
Avoid spiny drift at the application site. The interaction of many equipment-
and-weather-related factors determine the potential for apmy drift. Users arc
responsible for considering all these factors when making decisions.
The following drift managemcntrequirements must be followed m avoid off-mrgct
drfr movemrnt from aerial applications:
1. The dismnce of the outer most operating nozzles on the boom must not exceed
tL the length of the rotor.
2. Nozzles must always point backward parallel with the av stream and never be
pointed downwards more than 45 degrees.
Where smtes have more stringent regulations, they should be observed.
The applicamr should be familiar with and take into account the information
covered in the following Aerial Drift Reduction Advisory. [This information is
advisory in Harare and does not supersede mandamry label rcquirements.j
Aerial Drift Reduction Advisory
Information On Droplet Size: The most effective way to reduce drift potential is
to apply large droplets. The best drift management strategy is to apply the largest
droplets that provide sufficient coverage and control. Applying larger droplets
reduces drift potential, but will not prevent drift if applications are made improp-
sly, or under unfavorable environmenml conditions (tie Wind, Temperature and
Humidity, and Temperature lnversions).
Controlling Droplet Size:
s Volume-Use high flow rate nozzles te apply the highest prsctica] spray vol-
ume. Nozzles with higher rated flows produce larger droplets.
s Pressure-Do not exceed the nozzle manufacturer's recommended pressures.
For many nozzle types lower pressure produces larger droplets. When higher
flow rates are needed, use higher flow rate nozzles instead of increasing pressure.
r Number of Nozzles-Use the minimum number of nozzles thatprovide unifottr
coverage.
~ Nozzle Orientation--0rienting nozzles so that the spray is released parallel
m the airstream produced larger droplets than other onentations and is the rec-
ommended practice. Significant deflection from horizontal will reduce droplet
size and increase drift potential.
Po+vered hg C&P Press.