PERMFILE102895 - Laserfiche WebLink

Home Browse Search

CAMAS Colorado, Inc. • • Page I I Aggregate Production Faciltry Stonnwata Management Plan Identification of the equipment, systems and facility areas designated for inspection, the schedule for said inspections and comments on adjustments, repair or replacement is presented in a copy of the inspection form presented in Appendix B. 3.e Good Housekeeping Good housekeeping measures are an integral part of the materials management and spill prevention practices detailed in Section 3 of this document. In addition, the following practices and procedures have been or are to be implemented: • Regular refuse/garbage pickup and disposal at an appropriate municipal landfill; • Waste oil collected at the site will be stored in an appropriate container and removed on an as-needed basis; • The refuse dumpster will be equipped with a functional cover system to prevent direct contact of refuse with precipitation; • Chemical, lubricating Fluid and fuel storage containers will be located away from high vehicular traffic areas; • Empty/unused drums will be removed from the premises in a timely manner; and • Chemical storage containers will be clearly labeled and Material Safety Data Sheets (MSDSs) maintained for all chemical substances used at the site. 3.f Spill Prevention and Response Procedures In accordance with the provisions set forth in 40 CFR §112 -Oil Pollution Prevention and good engineering practices, a Spill Prevention Control and Countermeasures (SPCC) Plan has been prepared and implemented at the New Thornton Aggregate Facility. A copy of this plan is available in the New Thornton facility office and CAMAS Colorado, Inc. headquarters, and is incorporated herein by reference. 3.g Employee Training Training which explores the goals and basic components of the SWMP will be conducted for selected employees on an annual basis. Such training will include: • Spill Prevention; • Spill Response;