PERMFILE102136 - Laserfiche WebLink

Home Browse Search

• • PART III Page 1 1 of 11 • Permit No. CO-0033863 OTHER REQUIREMENTS (Continued) Within three (3) months after the date of permit issuance, a flow-measuring device shall be installed to give representa- tive values of effluent volume at some point in .the plant circuit, if not already a part of the wastewater plant. At the request of the Regional Administrator of the Environmental Protection Agency or the Director of the State Water Quality Control Division, the permittee must be able to show proof of the accuracy of any flow-measuring device used in obtainin~3 data submitted in the monitoring report. The flow-measuring de~iice must indicate values within ten (10) percent of the actual flow being measured. The limitations stated in PART I, Section A, are calculated on the basis of gross measurements of each parameter in the designated discharge regardless of the quantity and quality of these F~arameters ' in the plant inflow, unless otherwise specified. • _ if the permittee desires to continue to discharge, he shall re- apply at least one hundred-eighty (180) days before this permit expires. Within sixty (60) days of the issuance of this permit, the permittee shall file a statement with the Environmental Protection Agency and the State Water Quality Control Division which shall contain the names of the person or persons who are designated to report condi- tions as noted in PART II, Section A, Paragraph 2a (Noncompliance Notification), and as noted in PART II, Section B, Paragraph 7 (Oil and Hazardous Substance Liability). The permittee shall con- tinually update this list as changes occur at the facility. The permittee is required to submit an annual fee as set forth in Section 25-8-502 C.R.S. 1973 as amended. Failure to submit the required fee is a violation of this permit and will result in the suspension of said permit and enforcement action pursuant tt~ Section 25-8-601 et. seg., 1973 as amended. •