GENERAL32991 - Laserfiche WebLink

Home Browse Search

(1) Procedures that will be used to provide horizontal and vertical control, measure and record the elevation of the top and bottom of the wall and amount of penetration into bedrock, and identify the type of bedrock the excavation penetrates; (2) Descriptions of the field and laboratory tests that will be performed and the frequency of each type of test; (3) Actions to be taken if unsatisfactory material or workmanship are discovered in the installation; (4) Qualifications of field and office personnel. iii. Thornton shall have the right to observe any portion of the soil- bentonite wall installation. iv. Any interim written quality control observation reports and results of field and laboratory tests received by Aggregate shall be provided to Thornton upon or before the execution of this Agreement and shall continue to be provided during the installation of the liner. Thornton may also have a representative present at any meetings between Aggregate and its consultants or contractors relating to the installation of the liner, and Aggregate shall notify Thornton of any such meetings at least twenty-four (24) hours prior to the time of the meeting. v. A final completion report prepared by a Colorado registered engineer that demonstrates the constructed liner is substantially in compliance with the design shall be provided to Thornton within sizty (60) days after completion of liner installation. The final completion report shall include at a minimum the following: (1) Plan and profile drawing that shows the as-constructed location of the liner, the top and bottom elevation of the liner, the depth of penetration into bedrock, and a description of the type of bedrock penetrated; (2) Results of the field and laboratory tests performed and daily observation reports; Hammer Option & Purchase Agreement December 11, 2000 Page 8 of 29