Laserfiche WebLink
a. Name and purpose of facility, its location, and date of installation. <br />b. Name of owner, Design Engineer, MANUFACTURER, Fabricator, i£ <br />applicable, and name and telephone number of contact at the facility <br />who can discuss the project. <br />c. Thickness of geomembrane and surface area of the installed <br />geomembrane. <br />d. Type of seaming, patching, and tacking equipment. <br />e. A copy of the MANUFACTUREA's and/or Fabricator's approval let[erlsl <br />and/or licenselsl, if applicable. <br />H. CONTRACTOR shall provide the fallowing information after contract award but within <br />ten f 10) days prior to geomembrane arrival on-site and prior to commencement of [he <br />Work: <br />A copy of each of the Quality Control Certificates on each lot of resin issued <br />by the resin Supplier far the specific material far this project including <br />certification of the resin for extrusion welding. <br />2. The results of Quality Control testing conducted by the MANUFACTURER on <br />the resin used in manufacturing the specific material far this project. <br />3. A listing that correlates the resin to the individual geomembrane rolls and <br />welding rods. <br />4. A copy of the geomembrane roll Quality Control Certificates. These certificates <br /> shall be supplied at a minimum frequency of one 111 per every fifty thousand <br /> (50,0001 square feet of geomembrane material produced. These certificates <br /> shall be issued only for the individual geomembrane rolls sampled and tested by <br /> the MANUFACTURER or its representative. The certificates will contain test <br /> results of properties outlined in Article 2.01 of this Section. MANAGER <br /> reserves the right to refuse use of any geomembrane supplied without the <br /> proper quality convol documentationat no cost to OWNER. <br />5. A detailed list of performance criteria }or the geomembrane material being <br /> produced for this project. (Note: Performance criteria are sometimes referred <br /> to as 'minimum property values'. Refer to Articles 2.01 and 2.02 of this <br /> Section for geomembrane properties and Test Methods.) <br />6. Resume from the INSTALLER of the Installation Superintendent, Master Seamer, <br /> and Quality Convol Inspector to be assigned to the work, including dates and <br /> duration of employment. <br />7. Certifleatian hom the iNSTALLER that bath the Installation Supervisor, Quality <br /> Convol Inspector, and Master Seamer have reviewed the SPECIFICATIONS, <br /> Construction Quality Assurance Plan, and the DRAWINGS. <br />8. A panel layout drawing showing the proposed installation layout identifying field <br /> seams and including areas such as sumps, trenches and pipe penetrations as <br /> well as any variance or additional details that deviate from the DRAWINGS. <br />March 26, 1996 Section 02776.0 <br />02776.0-Z Geomembrane <br /> Revision 4 <br />