Laserfiche WebLink
4.2.3 Cut and Fill Volumes <br />• Approximately 465 cubic yards of material will be removed during <br />construction of the sediment pond. The various berms that will be <br />constructed will require approximately 300 cubic yards. The <br />remaining 165 cubic yards will be used to extend the working area <br />in the southern-most portion of the leased area. In this area, a <br />drainage ditch which connects the other industrial properties with <br />the D&RG sediment pond (outside of the permit area) limits access <br />to the entire tracks within the permit area. Therefore, an <br />extension to the existing culvert will be added, and the remaining <br />material used to fill this area up to the existing land surface. <br />The 10-inch thick layer of gravel which overlies the ground surface <br />will be scraped from the sediment pond area and will be deposited <br />on the newly filled area at the extreme south end of the permit <br />area. <br />4.2.4 Sians and Markers <br />• NCIG will comply with all regulations required for signs and <br />markers as stated by the CMLRD. The signs and markers will be <br />posted and maintained in areas where designation is required to <br />inform persons of the activities which are taking place. They will <br />b2 constructed of durable material and will be of uniform design <br />throughout the operation to insure visibility and readability. Any <br />local ordinances and codes which may involve signs and markers will <br />be followed. <br />NCIG will provide and install markers, as approved by CMLRD, along <br />the perimeter of the permit area. The markers will consist of <br />painted steel posts (for example green with a white top) and will <br />be placed at distances between 100 and 300 feet, depending upon <br />visibility. The markers will be spaced so as to be visible from <br />adjacent markers. They will be installed prior to any operation/- <br />construction at the load out facility. <br />• NCIG - Load Out Revision 4-3 ABC/1145/910531 <br />`/s~ql <br />