_REVISION - M1980244 ‎(30)‎

• Permit No: M1980244
• IBM Index Class Name: Revision
• Doc Name: Appendix E
• From: Cripple Creek & Victor Gold
• To: DMG
• Type & Sequence: AM8
• Media Type: D
• Archive: No

calibrated within 60 days prior to the tensiometer arriving on-site for testing field
samples.
• E. In order to prevent wind damaged geomembranes from being placed, the following Quality
Assurance procedures shall be followed:
1. CONTRACTOR shall perform its Work and utilize sufficient ballast as necessary to
prevent wind uplift ofthe geomembrane panels.
2. If wind damage should occur, CERTIFYING ENGINEER shall determine if the
geomembrane shall be repaired or replaced. Wind damage to [he geomembrane will
include wrinkles, creases, and tears, as determined by CERTIFYING ENGINEER.
3. Repa'v or replacement of the wind-damaged geomembrane shall be completed by
CONTRACTOR at no additional cost to CC&V.
4. As determined by MANAGER and CERTIFYING ENGINEER, the geomembrane
panel may be rejected at no cost to CC&V.
1.04 DELIVERY, STORAGE, AND HANDLING:
A. Packing and Shipping
Labels on each roll delivered to Site shall identify the following.
a. MANUFACTURER'S name
b. Product Identification
c. Thickness
• d. Roll number
e. Batch or lot number
E Panel number (when applicable)
g. Rall dimensions
2. CONTRACTOR shall ensure that geomembrane rolls are properly loaded and secured
to prevent damage during transit.
3. CONTRACTOR shall protect geomembrane from excessive heat, cold, puncture,
cutting, or other damaging or deleterious conditions.
4. CONTRACTOR shall ensure personnel responsible for loading, transport and
unloading of geomembrane aze fully aware of the consequences of damage to
geomembrane, and aze familiaz with handling and transport constraints imposed by
MANUFACTURER.
5. Geomembrane delivered to the project shall be protected by a relatively impermeable
and opaque protective cover, with individual straps for unloading.
B. Acceptance at Site
1. CQA Monitor shall perform inventory and surface inspection for defects and damage of
all geomembrane rolls upon delivery.
2. CONTRACTOR shall unroll and inspect any geomembrane roll that may be damaged
• below surface.
Section 02776 Page 5 of 20 October 25, 2000
Geomembrane Golder Associates Revision 8
D WHASEIV PSSA CERTUPPENDICIESYIPPENDIX E TECFMICAL SPECIFICATIONS\993-209902]]61R8 DOC