1992-09-01_REVISION - M1988112

• Permit No: M1988112
• IBM Index Class Name: Revision
• Doc Date: 9/1/1992
• Doc Name: QUALITY ASSURANCE/QUALITY CONTROL-PROTOCOLS FOR THE COLLECTION OF SURFACE AND GROUND WATER
• Type & Sequence: TR6
• Media Type: D
• Archive: No

1
listed as 0.04 mg/L in N.J.A.C. 7:9-6.1 et seq., Table 3, given in
' Appendix F.
No precision or accuracy data are given for the autoanalyzer, USEPA
' Method 9012. Based on the data from Appendix G and project
experience in the western United States, PQL values are likely to
be similar to the manual USEPA Method ,9010.
' 6.6 Reporting
Unless there is insufficient sample for any water quality analysis
to be performed (as in condition 1, Section 6.1), then the
t analytical laboratory will produce a report which comprises:
(1) A statement of the laboratory test results, and
(2) A quality assurance report.
' The report will be prefaced by a sheet which identifies the
' analytical laboratory, the laboratory job number, the client and
the date of the report. Certification is provided by the inclusion
of this page which will be signed and dated by an Authorized
representative of the analytical laboratory together with their
title.
6.6.1 Analytical Results Report: The analytical test results will be given
on laboratory data sheets which contain the following information:
' (1) The date of the report and the laboratory performing the
analysis;
1 (2) The client identification number, the name of the client
' and the laboratory identification number;
-43-