1999-06-10_REVISION - M1999002 - Laserfiche WebLink

Home Browse Search

r ROADAB LE EQUIPMENT: _________ _________ Total Eap Machine Description Cos[/hr Dn 11 Aig 5127. ]4 2500 gal . water truck 537. 03 Flat bed truck 535. 00 MOB/DEMOB SUPPORT EQUIPMENT: ___________________________ Non-Roadable Eqp. Description Roadable Eqp. Description Subtotals EQUIPMENT HAUL DISTANCE 6 TIME Nearest major city or town within project area region: Grand Junction ______________ Total one way travel distance = 104.0 miles. Average travel speed = Job Time - Non Roadable Equip.= 0.50 hours load Roadable Equip.= 2.60 hours haul 0.50 hours unload 2.60 hours return JOB COST sheet 2 of 2 Fleet Size Haul Trip Recu rn Trip (no. hauled) Cosc/hr Cost/hr 2 5255.48 $255.48 2 $74.06 $74.06 2 $70.00 $70.00 Subtotals $399.54 _________ 5399.59 _________ weight Ownership Haul Rig Fleet Size Haul Trip Return Trip DOT Permit (cons) Cos C/hr Cost/hr (no. hauled) Cosc/hr Cost/hr Cosc/ea Subtotals 50.00 $0.00 Total Eqp. Fleet Size Haul Trip Return Trip Cost/hr (no. hauled) Cost/hr Cost/hr Toc al Mob/Demob Cos[ _ $1],057.32 $0.00 $0.00 90.00 mph. N/A hours load 2.60 hours haul N/A hours unload 2.60 hours return $0.00 NOTE: Non-roadable egmpmenc )haul rig required m cranspoal mob/demob costs based on 2 round trips, each trip consisting of a one-way loaded haul and a one-way empty return. Roadable equipment Ina haul rig required) costs based on one round trip. Colorado DOT requires special permits for oversize equipment on certain specified road segments within the State. Separate permits are required for each rig on each loaded trip. Additionally, pilot cars lone or two per rig depending on degree of oversize) are also required for oversize equipment hauling, and loading/unloading times must be increased substantially for equipment which must be pa rc is lly dismantled for transport and re-assembled ac the job site. Costs for lifting equipment and other support equipment needed for this work should be included in the mob/demob costs.