HYDRO31424 - Laserfiche WebLink

Home Browse Search

an injection well within 800 feet of the Dunn well. Plans for cementing the Dunn well shall be sent to EPA for approval prior the cementing operation. No other corrective action is required. C WELL OPERATION 1. Prior to Commencino Infection. Injection operations shall not commence into any newly drilled or converted well until the operator has completed the following: (a) Formation data, corrective action, and injection fluid analysis have been submitted or complied with in accordance with Part II Sections A.5., B., and C.6., respectively; (b) All pertinent logs and test(s) run during the drilling and completion of the well, including descriptive reports as required in Part II A.6., have been submitted as well as the daily drilling and cementing records. (c) Mechanical integrity of the well has been successfully demonstrated pursuant to Part II C.2. and in accordance with the Guidance found in Appendix F and evidence thereof submitted. The operator shall notify the EPA thirteen (13) days prior to conducting the test(s) so that an authorized representative may be present to witness the test(s); and, (d) Construction is complete and schematic (wellbore diagram after construction) has been submitted to the Director with a notice of completion of construction using EPA Form 7520-10 (see Appendix B) and either: (i) The Director has inspected or otherwise reviewed the new injection well and finds it is in compliance with the conditions of the permit and the operator has received written authorization to commence injection; or, (ii) The operator has not received, within thirteen (13) days of the date of the Director's receipt of the report required above, notice from the Director of his or her intent to inspect or otherwise review the new solution mining well(s), in which Page 11 of 120 EPA FINAL Area Permit No. C03870-00000