My WebLink
|
Help
|
About
|
Sign Out
Home
Browse
Search
PERMFILE66910
DRMS
>
Back File Migration
>
Permit File
>
700000
>
PERMFILE66910
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
8/24/2016 11:12:38 PM
Creation date
11/20/2007 9:35:56 PM
Metadata
Fields
Template:
DRMS Permit Index
Permit No
M1997094
IBM Index Class Name
Permit File
Section_Exhibit Name
TABLE OF CONTENTS
Media Type
D
Archive
No
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
24
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
View images
View plain text
MINING PLAN (coNT) ~ • Exhibit C <br />The slab stone area will be mined from the west to the east. <br />This is done since the rock being mine is primarily on the surface <br />along the west side. Mining will begin by lifting exposed slab <br />rock with a fork lift. This breaks the stone into large slabs that <br />are bulk loaded or placed on pallets for delivery. The nature of <br />the deposit is such that it is exposed in this area and the upper <br />surface is very rough. Rather than try to strip topsoil from the <br />first layer of stone we will lift the stone and remove the <br />topsoil\overburden from the rock. The soil accumulates on the next <br />layer of rock that has a fairly uniform level surface. It is then <br />recovered from this smoother surface and stockpiled for use when <br />reclamation begins or respread on areas where mining is done. Once <br />the topsoil\overburden is stockpiled, the next layer (strata) of <br />stone is removed. Each stratum of stone varies in thickness from <br />4 to 20 inches. Mining continues in this manner until all usable <br />stone is removed from the area. We expect to excavate the upper 6 <br />to 12 feet of stone off the west area before mining is done. The <br />configuration is shown on the Reclamation Plan Map. <br />This deposit of rock is layered sandstone lying under the <br />Stroupe extremely stony loam, 9 to 25°/. slopes soil series. This soil is <br />described as a moderately deep, well-drained soil. This site is <br />consistent with the soils description in the SCS report, as being <br />located on mesas and foothills. The variation in depth is closer <br />to averaging 8 inches on our site, rather than the 20 to 40 inches <br />noted in the report. In places there is as much as 30+ inches of <br />overburden that may be usable for topsoil if properly conditioned. <br />The soils map shows another soil type for the eastern part of <br />the site. The Nunn stony loam, 3 to 9 percent slope is described as a deep <br />well drained soil, grayish-brown clay loam averaging 6 inches deep <br />in Pueblo County. This area is part of the prelaw disturbance area <br />for M.L.R.B. permit number M-77-326 so the topsoil and overburden <br />have been removed. The soil description and pertinent data are not <br />applicable to this application for that reason. We suspect that <br />this is the material residing in the piles along the north side of <br />the existing permit. <br />This particular deposit is on a gently sloping mesa typical to <br />the area. The total thickness of the slab deposit on this site <br />varies from 5 to 15 feet and averages approximately 10 feet. We <br />estimate there are 144,400 tons of recoverable material on the <br />site. The stone found in the mined area varies in size, color and <br />grades. We estimate it will take 6 to 10 years to remove all the <br />material from this site because the demand for material varies in <br />type, and size. This means that there will be times when we have <br />9 <br />
The URL can be used to link to this page
Your browser does not support the video tag.