Laserfiche WebLink
i <br /> <br />• <br />Mine <br />Descriptions of the individual oil containing facilities are presented in this Section and the <br />locations of the individual facilities are identified on Figure Z. To comply with § 112.7 General <br />Requirements for SPCC Plans the following nazrative describes pertinent sections of the <br />regulations that must be addressed at the Site. To facilitate the usefulness of this SPCC Plan, <br />each major oil-containing facility (facility) at the site has a sepazate section that addresses the <br />facility specific requirements. SPCC requirements and the SPCC Plan Section that addresses <br />each requirement are summarized in the following table. <br />zooa srcc <br />4.0 INDIVIDUAL DESCRIPTIONS OF OIL-CONTAINING FACILITIES <br />REGULATORY REGULATORY REQUIREMENT SPCC SECTION <br />CITATION DISCUSSION NUMBER S <br />112.7 a 3 A written descri lion of all facilities 4.1 - 4.9 <br /> <br />§112.7(a)(3)(i) An oil inventory depicting quantities of product and <br />4.1 - 4.9 <br /> used oils in stora a containers <br />§112.7(a)(3)(ii) Dischazge prevention and control measures 4.1 - 4.9 <br />and (iii <br /> Countermeasures for discharge discovery, response, <br />§112.5(a)(3)(iv) and clean-up, including how an outside contractor 6.1 <br /> can hel with clean-u <br />§ 112.7(a)(3)(v) Methods of disposal for contaminated soils, rags, 6 2 <br /> booms, etc. <br />§112.7(a)(5)(b) A written discussion and map depicting the 4.1 - 4.6 and Figure 2 <br /> direction of flow in the event of a s ill <br /> Provisions for and discussion of containment and or <br /> diversionary structures or equipment to prevent <br />§ 112.7(a)(5)(c) dischazges (dikes, berms, retaining walls, curbing, 4.1 - 4.9 <br /> culverts, gutters, weirs, booms, retention ponds, <br /> etc,) <br />112.7 d 1 Oils ill contin enc lan 7.0 <br /> A plan for tank and piping integrity testing and <br />§ 112.7(d) and (e) inspection protocols. Must be prepared by a 5.3 and Table 3 <br />and §112.8(c)(6) licensed professional engineer. Records of integrity <br /> testin must be maintained with the SPCC lan. <br /> Secondary containments must be designed (or <br />§ 112.7(h) verified) and provided for all storage containers to 4.1 - 4.9 <br /> hold the volume of the tank + an allowance for <br /> reci nation <br /> Complete discussion of conformance with <br /> applicable requirements and other effective <br />§l 12.7(j) dischazge prevention and containment procedures 4.1 - 4.9 <br /> listed in any applicable more stringent State rules, <br /> re ulations, and uidelines <br />6 <br />