Laserfiche WebLink
<br />• <br />• <br />C. Samolina Procedure <br />1. The following information will be provided on each sample bottle <br />label: <br />- Station/Well designation <br />- Date and time <br />- Bottle number <br />- Analysis code <br />- Individuals initials <br />2. Samples will be collected in such a manner as to minimize <br />physical disturbance at the sample point. <br />3. Sampling devices will be cleaned prior to use and samples will <br />be placed in clean sample containers which will be sealed at the <br />sampling site. <br />4. Samples will be placed in a cooler with ice immediately after <br />collection and will be shipped within 24 hours to a laboratory <br />for analysis. <br />5. Samples will be analyzed for the following parameters: <br />Suaaested Water Quality Parameters* <br />pH f Nitrate - Nitrite <br />Conductivity at 25° ~ Phosphate (PO°' as P) <br />Temperature (field) Sodium (Na') <br />Total Dissolved Solids ~ Sulfate (SO') <br />Bicarbonate (HCOa) - Arsenic (As) <br />a) Mater quality samples will not be collected at MW-8 because the inside <br />of the casing has been contaminated with oil. <br />Calcium (Ca'~) <br />Chloride (C1') <br />Magnesium (Mg") <br />Ammonia (NH,) <br />Cadmium (Cd)/ ~/ <br />Iron (Fe) / <br />Manganese (Mn) ~ <br />Mercury (Hg) /~ <br />Selenium (Se) J <br />Zinc (Zn) <br />* Dissolved species concentration only. <br />4. Proper sampling and preservation procedures will be followed for <br />each of the parameters listed above. <br />