PERMFILE47866

• Permit No: M1980244
• IBM Index Class Name: Permit File
• Doc Date: 9/3/2002
• Doc Name: Certifcation Report Phase IVa
• From: Cripple Creek & Victor Gold
• To: DMG
• Media Type: D
• Archive: No

C. Submittals By CONTRACTOR to MANAGER during the course of the work.

1. Daily reports detailing arrival and departure times, the personnel present on-site, the
progress of the Work, the arrival of materials, daily squaze footage deployed and
seamed, daily square footage of geomembrane approved by the CQA Monitor and any
problems encountered.
2. Subgrade surface acceptance certificates for each azea to be covered by the lining
system, sighed by CONTRACTOR.
D. Without limiting the provisions of the Contract, the CONTRACTOR shall warrant the Work to
MANAGER in accordance with the following:
1. The geomembrane supplied is suitable for the enduonmantal conditions at the site and
the service conditions as described in this SPECIFICATION.
2. The geomembrane supplied meets or exceeds all published SPECIFICATIONS as
referenced by the SPECIFICATION.
3. The geomembrane are free of defects in materials and workmanship.
4. The CONTRACTOR shall repair or replace all defects in the material detected on-site,
including uncovering and recovering the work, in compliance with the
SPECIFICATIONS at no additional cost to CC&V.
5. The CONTRACTOR shall repair any detected leaks in any seams (Manufactured or
field joined), including uncovering and recovering the work, in compliance with the
SPECIFICATIONS at no additional cost to CC&V.
1.03 QUALTTY ASSURANCE:
A. Manufacturing Qualifications
The MANUFACTURER(S) shall have experience in the manufacture of the type of
geomembrane that is being installed at the Cresson Project totaling at least five
completed facilities totaling a minimum of 5,000,000 squaze feet between all five
facilities.
2. The MANUFACTURER shall provide sufficient production and qualified personnel to
meet the demands of the work and shall have an internal quality control program for its
product.
3. The MANUFACTURER shall permit MANAGER, DESIGN ENGINEER, and/or
CERTIFYING ENGINEER or their authorized representative to visit the
manufacturing plant.
B. Geomembrane Installation Qualifications (INSTALLER)
1. INSTALLER shall be the MANUFACTURER or an approved CONTRACTOR
trained and licensed to install the MANUFACTURER'S geomembrane.
2. Installation shall be performed under the constant direction of single Installation
Superintendent who shall remain on-site and be responsible, throughout the
geomembrane installation, for geomembrane layout, seaming, patching, testing, repairs,
and all other activities by INSTALLER.
Section 02776 Page 3 of 20 October 25, 2000
Geomembrane Golder Associates Revision 8
i \OU2203~00 W~CERrREPo80TAPPENDSV3Pt199)-209902TIbIRB.DOC