Laserfiche WebLink
2• Electrical Conductivity~,oils analyzed <br />show conductivity ratings of good, <br />except ane sar.,ple of subsoil <br />(Table 78,pp.779-294) in the "Borrow <br />Area". Dilu*_ion of salts in Chis <br />soil should occur with mixing of <br />the subsoils. <br />3. Saturation Percentage: Soils having <br />saturation data rated good excep*_ <br />six samples (Table 71) representing <br />a Skylick A horizon, an Abor B <br />' horizon, a Winevada-Splitro A and C <br />horizon, an P.a'oerg A horizon, and a <br />Roust horizon. These six values <br />fall slightly below the Wyoming <br />D.E.Q, value of 25 (Tab Le 80).* <br />4. Texture: Laboratory data indicates that <br />soils analyzed rated good to fair <br />for topsoil except: <br />Aaberg with poor subsoil (clay) <br />Buckskin c,~ith poor subsoil (clay) <br />Routt with fair to poor subsoil (clay) <br />Unnamed 2 VE WLLh fair to poor <br />subsoil (clay) <br />Segregation of the <br />topsoil and mixing <br />will mitigate pote <br />problems caused by <br />Also, poor subsoil <br />for revegation. <br />subsoil from the <br />of the subsoils <br />:~tial plant growth <br />heavy texture. <br />is suitable <br />5. Sodium Adsorption Ratio (SAR): Those <br />soils analyzed for SAR and good <br />ratings except one sample that <br />rated fair. <br />6. Calcium Carbonate: Of the soils tested <br />for CaCO3 none had high values. <br />7. Boron and Selenium: Only Che Energy `Sine <br />;10. 1 area was sampled for selenium <br />and boron (Heil 197E). Levels rated <br />good according to Idyoming D.E.Q. <br />guidelines, Table 80. <br />* OSM has determined that this is an acceptable <br />value for Colorado. <br />