Laserfiche WebLink
p. 8 • • <br />located at or near the minesite or not within the permit area for Clie mine." <br />The applicant is responsible for meeting the requirements of 4.28. <br />3.02 Performance Bond Requirements <br />The applicant's "worst case" assumptions and calculations are currently <br />being reviewed. It is noted that the applicant has not submitted esti- <br />mates for removal of structures at the mine site or estimates for recla- <br />mation of the Trinidad loadout facility. These should be submitted to <br />the Division. <br />4.02 Signs and Markers <br />i <br />In addition to the "Blasting Area" sign, the applicanC needs to post a sign <br />r ~ "Warning, Explosives in Use" which clearly explains the blast warning and <br />all-clear signals in use. This sign needs to be placed at all entrances <br />to the permit area from public roads. <br />4.07 Sealing of Drilled Holes and Underground Openings <br />The applicant needs to provide a discussion of the methods utilized to <br />seal exploration holes at the mine. <br />4.09 Disposal of Excess Spoil <br />The staff disagrees with the applicant's contention that overburden area <br />ll9 does not fit into the valley or head-of-hollow fill category. To this <br />end, the applicant needs to provide information relative to the requirements <br />of 4.09.2 Valley Fill or 4.09.3 Head of Hollow Fill. <br />4.14 Backfilling and Grading <br />When rills and gullies deeper than 9 inches occur in areas which have been <br />regraded and topsoiled, the rills and gullies shall be Filled, graded or <br />otherwise stabilized, and the area reseeded or replanted (4.14.6(1)). The <br />above defines when the applicant is required to take action regarding rills <br />and gullies. <br />