Laserfiche WebLink
RPM,Inc.,25049 E.Alder Dr.,Aurora,CO 80016 Phone:(303)854-7499 Email:hlhumphries2(a)comcast.net <br /> ✓ Where soil unit is adjacent to GeD,there will be a difference of <br /> approximately nineteen inches between the two soils units (Ged and CyF). <br /> ✓ Soils unit Ged will be graded downward, onto soil unit CyF, creating a <br /> 3H:1 V or less slope. Six to eight inches of plant growth material will be <br /> placed on to CyF from the down slope grading of GeD. See below: <br /> ••• Figure 1: <br /> Grade over soils unit <br /> CyF <br /> 6-8" PGM Soils unit <br /> from soils CyF2a1ch <br /> unit GeD after grading <br /> Soils Unit Ged <br /> 0-60"clay loam <br /> Unweathered <br /> Soils unit bedrock <br /> PGM =Plant Growth Material <br /> Cr,clay to <br /> 60 inches - Area mined,CyF,+- 15 inches <br /> --� Replaced PGM <br /> Not to Scale <br /> --- Regraded Slope <br /> 3H:1 V slope <br /> or less <br /> • Soils Unit Extraction Area Fo: <br /> ➢ The extraction area within soils unit Fo will daylight to the Northeast. <br /> ➢ The west side of soil unit Fo and east of soil unit CyF will be graded as <br /> described in Figure 2 below. The east side of GeD will be graded over soils <br /> unit Fo, creating a 3H:1 V slope terminating on soil unit mined area Fo. <br /> 22 <br />