Laserfiche WebLink
Mobile equipment shall be equipped with roll-over-protection (ROPS) and/or X <br /> falling object protection structures FOPS as required by MSHA regulations. <br /> All machinery shall be secured to ensure zero mechanical potential prior to X <br /> work being performed on the machinery. <br /> Equipment shall be maintained in safe condition. X <br /> Provide a driller's safety platform. N/A <br /> Inspect hydraulic and pneumatic lines and couplings daily. N/A <br /> Provide whip checks for all airline connections. N/A <br /> J. ELECTRICAL SAFETY <br /> Electrical lock and tag procedures are to be used at all times. N/A <br /> Prepare a plan for working in the vicinity of overhead electrical transmission X <br /> lines. <br /> K. SAFE WORK IN ELEVATED AREAS <br /> Fall Protection shall be a full body harness and shock-absorbing lanyard. X <br /> Wire rope lanyards are required for cutting and welding operations. X <br /> All personnel are to be tied off if working where a fall hazard exists. X <br /> Ladder work procedures shall include set up, tie off, inspection and protection <br /> from overhead electrical hazards. Only non-conductive ladders are to be used. X <br /> L. SCAFFOLDS <br /> Scaffold use requires an approved plan. N/A <br /> M. AERIAL LIFTS <br /> Personnel must be tied off at all times when working in man baskets. N/A <br /> Provide rigging and signaling procedures for helicopter work. N/A <br /> N. CRANE REQUIREMENTS <br /> Inspection and annual certification records must be provided. N/A <br /> Proper Rigging Procedures and inspection of lifting devices shall be X <br /> standardized. <br /> Tag lines shall be used at all times. X <br /> Ground persons shall be used at all times. X <br /> Signals shall be standardized and used at all times. X <br /> Overhead line clearances shall be checked before working. X <br />