Laserfiche WebLink
2012 Prospecting Drill Holes <br /> Attempts were made to reenter drill hole HENXI 103B in June of 2012 but the casing had been <br /> damaged and the hole plugged approximately 1 Oft below the collar. The hole was not drilled <br /> further. <br /> HENX1103C <br /> Drill hole HENX1103C was drilled from Site 2 on the Harrison Mountain Proposed Drill <br /> Locations Map located at Longitude 1050 49.681' W, Latitude 39' 45.744' N, and an <br /> elevation of 11,084 feet above sea level. It was drilled as a twin of <br /> HENX1103/HENX1103B with a collar shifted by 5ft to the East. It was drilled to a <br /> depth of 2,564ft in bedrock comprised of Precambrian granite and Tertiary rhyolite <br /> porphyry. It did not encounter an aquifer. A portion of the rods were lost down hole and <br /> the hole caved in on itself. The collar was subsequently buried with material from the <br /> drill pad. <br /> HENX1201 <br /> Drill hole HENX1201 was also drilled from Site 2 on the Harrison Mountain Proposed <br /> Drill Locations Map located at Longitude 105' 49.681' W, Latitude 39' 45.744' N, and <br /> an elevation of 11,084 feet above sea level. This hole was drilled to a depth of 4,86011 in <br /> bedrock consisting of Precambrian granite and Tertiary rhyolite porphyry. It did not <br /> encounter an aquifer. The hole was sealed with 100ft of cement from the collar down <br /> hole. <br /> 2013 Prospecting Drill Holes <br /> During the summer of 2013, three holes were drilled from Red Mountain using a reverse <br /> circulation (RC) drill rig. One hole was continued with a diamond core rig. Still site locations <br /> can be seen on the attached Red mountain Exploration Drill Map. <br /> HENX1301/HENX1301A <br /> During road construction it was determined that the proposed location of Drill Site 3 was <br /> too steep to safely construct a drill pad. Site 3 was subsequently moved from it's <br /> originally intended location to Longitude 105' 49.779' W, Latitude 39' 45.894' N, at an <br /> elevation of 11,200 feet above sea level. Approximately 950ft NE from the original <br /> intended location. <br /> Drill hole HENX1301 was drilled from Site 3 on Red Mountain located at Longitude <br /> 105'49.779' W, Latitude 39'45.894' N, and at an elevation of 11,200 feet above sea <br /> level. This hole was drilled with a RC rig to a depth of 2,800 ft. in Precambrian granite <br /> and schist bedrock. The hole encountered very small (1-2 gal/min) amount of water at a <br /> depth of 160 ft. to 180 ft. More significant water was encountered at 1,420 ft. but water <br /> was not present past this depth. The hole was cemented from the bottom back up to <br /> 2,240 ft. and re-enterd with a diamond drill rig as HENX1301A. A wedge was placed at <br />