Laserfiche WebLink
12 <br />in item no. 10 above. If a measurement was outside of its <br />normal range or above a numeric standard it is discussed <br />below. <br />Wad2c Overburden <br />-Site 009-79-4 <br />• Field conductivity was 1060 UMS/CM on September <br />18, 2014. The maximum level recorded according to <br />Table 2A is 1010 UMS/CM. <br />-Site 006-82-74C <br />• pH was measured to be 9.27 on September 18, 2014. <br />The maximum pH level recorded according to table <br />3A is 9.2. The Table 3 standard for agricultural use <br />for pH ranges from 6.5 to 8.5. <br />• Manganese levels were measured at 456 ug/1(.456 <br />mg/1) on April 28, 2014. The Table 3 standard is .2 <br />mg/l. It appears the average manganese levels at this <br />site are .5 mg/l. <br />-Site 91M006 <br />• pH was measured to be 9.5 and 9.64 on April 29, <br />2014 and September 16, 2014 respectively. The <br />Table 3 standard for agricultural use for pH ranges <br />from 6.5 to 8.5. It appears the average pH at this site <br />is 9.97. <br />-Site 008-77-58 <br />• Conductivity was measures to be 1777 ums/cm on <br />May 1, 2014. This is slightly higher than the <br />maximum level of conductivity reported on Table <br />5A. <br />-Site 93M00l <br />• pH was measured to be 9.4 and 9.45 on April 29, <br />2014 and September 16, 2014 respectively. The <br />Table 3 standard for agricultural use for pH ranges <br />from 6.5 to 8.5. It appears the average pH at this site <br />is 9.44. <br />TwepVmile Sandstone <br />-Site 006-BRDH7 <br />• pH was measured to be 9.04 and 9.11 on April 28, <br />12 <br />