Laserfiche WebLink
13 <br />2014 and September 19, 2014 respectively. The <br />Table 3 standard for agricultural use for pH ranges <br />from 6.5 to 8.5. It appears the average pH at this site <br />is 8.6. The pH measured in 2014 appears to be above <br />the maximum level recorded. <br />-Site FBR-2 <br />• Conductivity was measured to be 1850 and 1960 <br />ums/cm on April 29, 2014 and September 16, 2014. <br />The maximum conductivity reported for this site on <br />Table 8A is 1910 usm/cm. <br />-Site 97013TM <br />• pH was measured to be 9.4 and 9.58 on April 30, <br />2014 and September 19, 2014 respectively. The <br />Table 3 standard for agricultural use for pH ranges <br />from 6.5 to 8.5. It appears the average pH at this site <br />is 9.62. It appears that baseline pH levels at this well <br />were above the Table 3 standard. <br />Trout Creek Sandstone <br />-Site 001-83-106 <br />• Conductivity was measured to be 1420 on April 28, <br />2014. This is greater than the maximum level <br />reported on Table l0A for this site. <br />• The pH level was measured at 8.8 on April 28, 2014. <br />The Table 3 standard for pH is 6.5-8.5. It appears the <br />average pH for this site is above the Table 3 <br />standard. <br />• Sulfate was measured to be 210mg/1 on April 28, <br />2014. This is greater than the maximum level <br />reported on Table l0A for this site. <br />-Site 95M001 <br />• The pH level was measured to be 9.96 on April 29, <br />2014. The Table 3 standard for pH is 6.5-8.5. It <br />appears the average pH for this site is above the <br />Table 3 standard. <br />-Site FBR-2 <br />• The pH level was measured to be 9.07 on April 29, <br />13 <br />