Laserfiche WebLink
Map King II 007A <br />11. There is a great deal of visual information on this map. Generally a map should not <br />have more than 7 separate layers on it, more than that is too much information. To <br />make it legible and easier to use please make the following changes: <br />a. Please orient all text horizontal from left to right, eliminate upside <br />down, sideways etc. text. <br />b. All elevation values should read from left to right with map facing up. <br />Maybe offset them from each other a bit. <br />c. Make sure text is not obscured and under other layers <br />d. Please remove the crosshatching for the basins, but keep outline <br />colors for each basin (maybe with a thick line, and do also keep the <br />directional flow arrows). <br />e. Please indicate acreage for each basin (use one font color for all <br />acreage, e.g. dark blue), or on the map provide a table indicating <br />each basins area. <br />f. Please remove symbology from the map that is not pertinent to the <br />map (dots at right edge of map, red line with x's, green curly que <br />lines, etc.). This map focuses on hydrology. <br />g. Symbolize any natural streams <br />h. In the legend, please call out all symbols used on the map <br />i. Map needs a North arrow and a scale e.g. 1" = 100' or whatever it is. <br />j. What is the symbol for culverts? Please put symbology for culverts in the <br />legend and make sure all culverts are symbolized on the map. You do <br />a great job of calling out the culverts. <br />k. You show manholes on the map. It is unclear where they outlet. Please <br />indicate on the map or in a table where manholes outlet. <br />I. I was unable to verify culvert lengths for the culverts listed below. Please <br />indicate where on the map the following culverts begin and end: <br />a. C7 <br />b. C9 <br />c. C16 <br />d. C17 <br />Mag Kinci II 007B <br />6. To make this map legible and easier to use please make the following <br />changes: <br />a. Orient all text horizontally from left to right, eliminate upside down, <br />sideways etc. text. <br />b. Consider reducing the font size on the ditch labels <br />c. Please increase the font size for the culverts, elevations, station and <br />cross section marks. <br />d. All culverts along the Clear Water Ditches are called out with their diameter. <br />At the top of the West Clear Water Ditch, culvert C-18 is called out. The <br />diameter of C-18 is not indicated here. Please, call out the diameter of C- <br />18 at its location on the map. <br />Adequacy King Coal Sept 2015 Page 2 <br />Prepared by: R. Reilley <br />