Laserfiche WebLink
e. The station and cross section elevations are not discernible on this map. <br />Please place the nearest 10' contour line value so that cross section <br />elevations can be verified with the cross section diagrams to the <br />rig ht. <br />f. Also, please make the 10 foot contour lines thicker. <br />Map King II 007C <br />7. Please increase the font size on: <br />a. Spillway elevations called out on the Stage Storage Curve table at the <br />right of the map. <br />b. Storage Value Computation for Sediment Control Structure No. 1 at <br />the right of the map. <br />c. Elevations for the pond drawing. <br />d. Also, make sure pond elevations are legible by placing text on top of <br />other layers or lines. <br />S. Please call out and label the top of embankment elevation on the pond, <br />maybe show with a heavier line. <br />Rule: 4.03(4) Drainage and Culverts <br />The general requirements of this section include: <br />C The ability of culverts to pass the 10 year 24 hour rain event. <br />C Are constructed to avoid collapse and erosion at inlets and outlets <br />o Accommodate flow from intersecting drainages. <br />The general requirements of this section have been adequately met in the permit. I may <br />have additional questions when I can verify designs through SedCad. <br />Kinq II Ditch Capacities, Drainage Basins <br />9. Please confirm that the table King II Ditch Capacities provided in the TR25 <br />packet replaces the table in the permit Appendix 11 (1) King II Ditch <br />Capacities dated March 2010 as a revised page <br />10. Please confirm that Appendix 3A King II Ditch Capacities dated 2009 is no <br />longer relevant information. <br />11. Please confirm that the table King II Drainage Basins provided in the TR25 <br />packet replaces the table in the permit Appendix 11 (2) King II Basin Flows <br />dated 2009 as a revised page. <br />Culvert Capacities <br />12. Please confirm that the table Culvert Capacities provided in the TR25 <br />packet replaces the table in the permit Appendix 11 (3) King Culvert <br />Capacities dated March 2009. <br />13. The table indicates that culvert C14 flows from ID -3. I was unable to locate ID -3 on <br />the map. Please make sure ID -3 is located on the map. <br />Adequacy King Coal Sept 2015 Page 3 <br />Prepared by: R. Reilley <br />