Laserfiche WebLink
2. Location of clean up kits <br />The kit will contain an absorbent boom, absorbent litter and an over -pack drum to store the <br />material. <br />Spill Response Kit and Locations <br />Type of Kit Location <br />Project Site /Over Pack Drum Staging Area <br />Truck Size Spill Coordinator <br />Truck <br />3. Quantities of chemicals and locations stored on -site <br />The following is a table of chemical quantities and where they are located on site. <br />➢ Also see Potential Pollutants List and Evaluation in SWMP Notebook <br />Chemicals and Quantities <br />Material Quantity Staging/Storage Location <br />Fuel Undetermined in All Staging Areas <br />proper stage <br />containment <br />Oil Undetermined in All Staging Areas <br />proper stage <br />containment <br />Potable Restrooms N/A Pre - designated staging areas <br />Hydraulic Fluid N/A Equip. and various staging <br />areas. <br />➢ Hazardous chemicals or restrooms will not be placed and /or stored more than 50 ft. from state <br />waters. <br />4. Label system for chemicals and Material Safety Data Sheets (MSDS) for products <br />Any products /chemicals that are located or stored onsite shall be properly labeled as to the contents of <br />the material. The Material Safety Data Sheets for all products /chemicals utilized onsite can be found in a <br />notebook at the project trailer. <br />5. Notification and clean up procedures to be implemented in the event of a spill for spills which do not <br />enter state waters or are under the reporting limits of the chemical of concern (diesel fuel, hydraulic <br />fluid, motor oil, used hydraulic fluid and motor oil, tack oil). <br />