Laserfiche WebLink
ameO <br /> SECTION 02776.0 GEOMEMBRANE <br /> PART 1: GENERAL <br /> 1.01 SUMMARY <br /> This SPECIFICATION describes requirements for the manufacture, fabrication (if needed), supply, and <br /> installation of polyethylene geomembrane for lining of the mill site platform, as shown on the DRAWINGS; <br /> and construction quality control monitoring and testing. All procedures, operations, and methods shall be in <br /> strict compliance with the SPECIFICATIONS,Construction Quality Assurance Plan,and the DRAWINGS. <br /> 1.02 SUBMITTALS <br /> A. CONTRACTOR shall provide the following information relating to the geomembrane <br /> MANUFACTURER and INSTALLER with its proposal. <br /> 1. Information from the MANUFACTURER including company name, address, telephone <br /> number,the names of the company president and quality control manager, and narrative of <br /> the company history. <br /> 2. Information from the MANUFACTURER on factory size, equipment, personnel, number <br /> of shifts per day,and capacity per shift. <br /> 3. Quality Control Manuals from the MANUFACTURER and INSTALLER for the <br /> installation and testing of the geomembrane, including trial seams, seaming,nondestructive <br /> testing, destructive testing procedures, repair procedures and in-field quality control forms. <br /> Upon review of the Quality Control Manuals, MANAGER may request additional testing <br /> during the manufacturing process at no additional cost to CC&V. <br /> 4. A list of at least five completed facilities from the MANUFACTURER totaling a minimum <br /> of 5 million(5,000,000) square feet between all five facilities of the type of geomembrane <br /> that is being installed at the mill site earthworks project. Each entry in this list should <br /> specify the name and purpose of the facility,its location and date of installation,the name of <br /> the owner, the project manager, designer, fabricator (if any), and the geosynthetics <br /> installation contractor and the name and telephone number of the contact at the facility who <br /> can discuss the project. In addition,the geomembrane thickness and total square footage of <br /> the installation surface should be included. <br /> 5. Installation capabilities of the INSTALLER. <br /> 6. Information on equipment and personnel from the INSTALLER. <br /> 7. A list of at least five completed facilities, totaling five million (5,000,000) square feet for <br /> which INSTALLER has installed the type of geomembrane that is being installed at the <br /> mill site earthworks project. For each installation, the following information shall be <br /> provided: <br /> a. Name and purpose of facility,its location,and date of installation. <br /> b. Name of owner,Design Engineer, MANUFACTURER,Fabricator,if applicable, <br /> and name and telephone number of contact at the facility who can discuss the <br /> project. <br /> Section 02776 Page 1 of 22 May 9,2012 <br /> Geomembrane Revision 1 <br />