WSP04027

• File Number: 8449
• Description: Platte River Studies
• State: CO
• Basin: South Platte
• Date: 3/1/1993
• Author: TEC
• Title: Project Manual for Peterson Dam
• Water Supply Pro - Doc Type: Publication

IC.5.

A.

IC.6.

A.

B.

D.

and coordination of the information within the submittal with requirements
of the Work and the Contract Documents.
i. Provide a clear space approximately 3'h" x 2'h" for Engineer's stamp.

I
I
I
J
1
I
I
I
I
I
I
I
I
I
I
I
I
I
I

SAMPLES

Samples shall be of sufficient size and quantity to clearly illustrate the functional character-
istics of the product, with integrally related parts and attachmem devices and the full range
of color, texture, and pattern.

OPERATION AND MAINTENANCE MANUALS

Submit Operation and Maintenance manuals by the time the Work is fifty percent (50%)
complete for all equipment so designated in the individual Specification Sections and for
which the Shop Dnwings have been reviewed and marked "No Exceptions Taken" or
"Make Corrections Noted". In addition, submit instruction books and other pertinent
information for equipment not so designated which required special instruction or
knowledge for proper operation and maintenance.

Submit Operation and Maintenance manual for equipment by the time Work is ninety
percent (90%) complete.

C.

Do not start or operate equipment until the respective operation and maintenance data has
been reviewed, approved, and copies made available at the site.

The Operation and Maintenance manuals shall be in addition to instructions or parts lists
packed with or attached to equipment when delivered.

E.

Include, as a minimum, the following information:
1. Equipment function, normal operating characteristics, and limiting conditions
complete motor data, test data, and performance curves where applicable.
2. Operating instructions for start-up, routine, and normal operations, regulations and
control, shutdown, and emergency conditions.
3. Lubrication and routine maintenance instructions.
4. Guide to "troubleshooting".
5. Parts lists, predicted life of parts subject to wear and recommended list of spare
parts to be on hand.
6. Outline, cross-section, and assembly drawings; engineering data; and wiring
diagrams.
7. Copy of accepted or as constructed Shop Drawings.
8. Temperature control diagrams.
9. System balance repon including a description of system operation as prepared by
the balancing contractor which includes a schedule of inspection and maintenance.
10. System Schematic Flow Diagrams.

F.

Format
1. Submit in a format suitable for binding in a three-ring binder or a post binder.

lC-4
92.(l24