Laserfiche WebLink
<br />0024 ~i3 <br /> <br />Duraneo Pumoine Plant - Staee I <br /> <br />Submitted reinforcement drawings shall identify the specification drawings from <br />which details were obtained, <br /> <br />Submitted reinforcement drawings shall be clearly marked to identify the <br />structure, section, and view, <br /> <br />9. Bar lists shall be clearly marked to identify drawing, structure, section, and view. <br /> <br />10, Reinforcement quantities shall be calculated and shown on bar lists. <br /> <br />I I , Overall size of drawings shall not exceed 22 by 34 inches unless otherwise <br />approved, <br /> <br />7. <br /> <br />8. <br /> <br />I <br />\ <br /> <br />D. Prior to making concrete placements, provide corrected reinforcement drawings for that <br />placement that reflect the approved or corrected reinforcement details. Include updated <br />bar-bending diagrams, bar lists, and total weight of bars on each drawing for each <br />concrete placement. . <br /> <br />PART 2 <br /> <br />PRODUCTS <br /> <br />2.01 REINFORCEl\IENT <br /> <br />A. Reinforcing bars and anchor bars: <br />1. ASTM A 615 or A 617, deformed steel bars, <br />2. Grade: 60, <br /> <br />2.02 ACCESSORIES <br /> <br />(( <br /> <br />A. Chairs, Hangers, Spacers, and Other Supports: <br />I, For surfaces to receive F2 and F3 fmishes where supports will be exposed: <br />a. Provide galvanized steel or other corrosion-resistant material. <br />b. Do not use concrete supports. <br />c. Do not embed wood in concrete. <br />Other locations: provide concrete, metal, or other approved material. <br /> <br />2, <br /> <br />PART 3 <br />3.01 PREPARATION <br /> <br />EXECUTION <br /> <br />A. Clean reinforcement and supports before embedment in concrete. <br /> <br />B, Remove heavy flaky rust, loose mill scale, dirt, grease, and other foreign substances. <br /> <br />3.02 INSTALLATION <br /> <br />A. <br /> <br />Do not install reinforcement until detail drawings have been approved, <br /> <br />II <br />\ <br /> <br />Reinforcing Steel <br />03210-2 <br />