Laserfiche WebLink
<br />( <br /> <br />'l <br /> <br />0024 A <br /> <br />Duranllo Pumoinll Plant - Stalle 1 <br /> <br />B, Cut, bend, and place reinforcing in concrete where indicated on reinforcement drawings, <br /> <br />. <br /> <br />C. <br /> <br />Locate splices where indicated on reinforcement drawings except as approved by <br />Contracting Officer's Technical Representative, <br /> <br />0, Secure reinforcement in position to prevent displacement during concrete placement. <br /> <br />E. Maintain reinforcement in position during concrete placement. <br /> <br />F, Do not field bend bars to permanent set. <br /> <br />G. Do not straighten bars, <br /> <br />H, Do not weld or tack weld reinforcing bars. <br /> <br />I. Maintain clear distance of I inch, minimum, between reinforcement and anchor bolts, <br />form ties, embedded metalwork, guardrail posts, and waterstop. <br /> <br />3.03 TOLERANCES <br /> <br />A. Cover: <br /> <br />1. <br />2, <br /> <br />Conform to drawing _ (40-0-6263). <br /> <br />Maintain concrete cover over reinforcement within 1/2-inch of specified cover <br />where specified cover is greater than 2-1/2 inches. <br /> <br />Maintain concrete cover over reinforcement in other concrete within 1/4 inch of <br />specified cover where specified cover is 2-1/2 inches or less, <br /> <br />~ <br /> <br />3. <br /> <br />B, Spacing: Maintain spacing of reinforcing bars within I inch of required spacing, <br /> <br />END OF SECTION <br /> <br />Reinforcing Steel <br />03210-3 <br />