Laserfiche WebLink
<br />. Approach: <br />1, Boyle: Revise the Phase II direct diversion command file associated with the OMI watright to <br />include aggregated irrigation structures and aggregated M&! structures. Include the aggregale <br />command to define which structures are associated with each aggregated irrigation structure <br />identified in Task 3.03. Include the wrclass command to define the water right classes determined <br />in Task 3.05, Include the setdiv command to include aggregated M&I structures determined in <br />Task 3,10. Execute the OMI watright for direct diversions using the -rightsd option, Check and <br />document the reported acreage against the GIS acreage for the aggregated irrigation structures, <br />Replace the aggregated irrigation structure database acreage with GIS acreage using thc seldi\' <br />command and rerun watright. If a revised version of watright is available, include the seldi\'/' <br />command to include aggregated M&I rights not in the database. If a revised version of watright is <br />not available, revise and execute an A WK program developed in Phase II to include aggregated <br />M&I structure rights at the same time free water rights are added, Note, aggregated M&l structures <br />will be assigned water right and decree data determined in Task 3.10. <br />2. Boyle: Revise the Phase II instreanl flow comm1!Ild file associated with the OMI watright to <br />include instreanl flQ;"vs as a reach, Include the setisf command to include the instream flow reaches <br />identified in Task 3,12, Execute the OM! watright for direct diversions using the -righlsi option, <br />If a revised version of the OMl watright is available use the revised instreanl flow demand file <br />(* .ifa) generated by the OMI watright after checking it for reasonableness. If a revised version of <br />watright is not available, hand edit the Phase II instream flow demand file (*ifa) to reflect an <br />. instream reach and the data determined in Task 3.12. <br />3. Boyle: Revise the Phase II reservoir command file associated with the OMl watright to include <br />aggregated reservoirs. Includ€l11e=aggres option to aggregate reservoirs not explicitly modeled, <br />Include the wrclass command to define aggregated reservoir water right classes to be the same as <br />those determined in Task 3,05, Execute the OMI watright for reservoirs using the -rightss option, <br />If a revised version of watright is available then the reservoir station (*rcs) and reservoir right <br />(* .rer) files will include an entry for each aggregated reservoir. Oata such as capacity and water <br />rights will be distributed evenly to each aggregated reservoir assigned, In addition, the selres <br />command will allow stock ponds to be added to the reservoir structure file (*rcs) and the setres/' <br />command will allow stock pond rights to be added to the reservoir right file (*rcr.) If a revised <br />version ofwatright is not available, hand edit the reservoir station (*res) and reservoir right C*.rer) <br />files to distribute aggregated reservoir station and right data to the number of aggregated reservoirs <br />with the data determined in Task 3,11, Also, hand edit the reservoir station (* .res) and reservoir <br />right (*,rer) files to include aggregated stock ponds with the data determined in Task 3.11, <br />4, Boyle: Prepare Task Memorandum 3.07 containing approximately 3 pages of text describing the <br />results of this Task, including Subtask 3 that was performed by the STATE. <br /> <br />OeliverabIes: <br />1. Boyle: Watright output for direct diversions including aggregated irrigation and aggregated M&l <br />structures, <br />2, Boyle: Watright output for instream flows treated as a reach, <br />3. Boyle: Watright output for reservoirs including aggregated reservoir and stock ponds structures, <br />4, Boyle: Task Memorandum 3,07 describing the results of this Task, <br /> <br /> <br />l.~a 1 <br /> <br />Phase IlIa Scope of Services <br /> <br />A-27 <br /> <br />Ja031,1997 <br />