Laserfiche WebLink
<br />. <br /> <br />.xcu report. Tag each modeled M&I structure with the County/HUC combination and sUmmarize M&l <br />consumptive use in each County/HUC. <br />2. STATE: Determine the total M&I water use (depletion) from the Phase II consumptive use report <br />for the White River Basin on an average annual basis (12 values, one for each month) for each County <br />HUe. <br /> <br />3. R TIWR: Calculate the difference between the explicitly modeled M&I depletion and the total basin <br />M&I depletion by County/HUe. <br />4, STATE: Determine three locations (nodes) within the White River Basin to distribute the M&I <br />depletion that was not modeled in Phase II. This will be done by visually inspecting the CROSS <br />municipal GIS coverage and considering the County/HUC distribution from the consumptive use <br />report. Allocate depletions to the three nodes, It is anticipated that RTi would assist the State in <br />determining M&I structure locations. <br />5. STATE: Assign an estimated senior water right (senior relative to the White River Basin) to each of <br />the three M&I nodes to reflect their priority use status in the Basin. <br />6, RTIWR: ModifY the StateMod input files to represent the three additional M&l nodes, (because <br />these nodes are modeled as depletive, assume an efficiency of 100%, and a large capacity) <br />7. STATE: Document the location of the three additional aggregated M&l nodes and the <br />determination of their water use time series in a 2-4 page draft memorandum. RTi will review the draft <br />and provide written comments before the State finalizes the memo. <br /> <br />. Deliverables: <br />,I I, Report on M&I consumptive uses modeled in Phase II separated by County/HUe. <br />2. Report on M&I consumptive uses for White River Basin from consumptive use report as divided <br />by County/HUe. <br />3. M&I depletion not modeled in Phase II which should be imposed in Phase II modeling, <br />4. Location of three nodes to superimpose M&I demands to be modeled in Phase III. <br />5. Assigned water right for aggregated M&I structures. <br />6, Updated StateMod input files reflecting the aggregated M&I structures. <br />7. A memorandum describing the aggregated M&I demands, their associated characteristics (demand, <br />location, efficiency, return location). <br /> <br />Task 2.11 <br /> <br />Aggregate Reservoirs and Stock Ponds <br /> <br />Objective: Aggregate reservoirs and stock ponds not explicitly modeled in Phase II to allow simulation <br />of effects of minor reservoirs in the basin, <br /> <br />Assumptions: Basis for aggregating reservoirs not modeled in Phase II is the W A TRI G HT utility and <br />data base and the State's database of non jurisdictional dams. <br /> <br />Approach: <br /> <br />. <br /> <br />1. RTIWR: Write an SQL script that acce,ss the CROSS data base to provide a list (name, wdid, net <br />absolute storage decree) of storage structures not modeled in Phase II and a sum of those rights, <br />Execute that script for the White River basin, <br /> <br />Phase lIIa Scope of Services <br /> <br />1170 <br /> <br />A-14 <br /> <br />Jan31,1997 <br />