FLOOD07317 - Laserfiche WebLink

Home Browse Search

e -e I , .... e I L;, , , I J 10.07 10.08 needed, be supplemented by the CONTRACTOR wbo shall provide shop drawings, equipment sening drawings, reinforcement steel placement drawings, erection schedules, material samples, performance charges, manufacturer's brochures, and other needed information. If any of the above mentioned information is required, the CONTRACTOR will, as soon as the work begins, prepare a schedule for its submission to the ENGINEER. The purpose of the schedule is to establish at an early date the needs and dates of needs so that the approval process does not delay the WORK. No WORK based on such supplementary DRAWINGS and SPECIFICATIONS shall be performed until such supplemenrary DRAWINGS and SPECIFICATIONS have been reviewed as herein provided. Since this supplemental data may be needed to assure that the designer's concepts, as expressed by the DRAWINGS and SPECIFICATIONS are correctly interpreted and that the final work product satisfied the design intent, review of the supplemental data shall be the responsibility of the design professionals. Submittal of this data shall follow the normal channels of communication. All submittals, regardless of sources, must be endorsed by the CONTRACTOR. Review of supplementary DRAWINGS and SPECIFICATIONS is based only on whether or , not these indicate that the subject of the supplemental data satisfies the basic design concept and intent. Such review by the designer shall never be used by the CONTRACTOR to claim relief from his ultimate responsibility of providing to the OWNER the end product for which it contracted. When submitted for review, SHOP DRAWINGS shall bear the CONTRACTOR's certification that he has reviewed. checked and approved the SHOP DRAWINGS and that they are in conformance with the requirements of the CONTRACT DOCUMENTS. ADDITIONAL INSTRUCTIONS AND DETAIL DRAWINGS ISSUED BY ENGINEER OR OWNER. The CONTRACTOR may be furnished additional instructions and detail drawings, by the ENGINEER and/or OWNER as necessary to carry out the WORK required by the CONTRACT DOCUMENTS. The additional drawings and instructions thus supplied will become a part of the CONTRACT DOCUMENTS. The CONTRACTOR shall carry out the WORK in accordance with the additional detail drawings and instructions. SUBSTITUTIONS. No approval of requests for substitutions of equivalent materials, equipment, processes, or products will be made prior to the award of CONTRACT; however, approval of all substitutions is mandatory prior to installation. Documentation, related information and data, including but not necessarily limited to the following, shall be submitted: a. Full catalog data, specifications, drawings, illustration, etc., showing complete engineering physical and mechanical characteristics, dimensions, performance, capacity and ratings, and all other necessary information. b Any and all departures from the SPECIFICATIONS must be pointed out and shown on material submitted. c. Reas8n for requesting "Or Equal" such as quality, cost of maintenance or operation, price, delivery, etc. The ENGINEER shall indicate approval or disapproval of the requested sUbstitution(s) either by separate letter or by endorsement on the CONTRACTOR's letter of request. Any additional III-9 (1723 - 10/93)