FLOOD02939 - Laserfiche WebLink

Home Browse Search

. . . Colorado Project No. NH 0504-042 SH 50 at Rocky Ford Construction Subaccount No. 13561 7/2/01 -2- TRAFFIC CONTROL PLAN - GENERAL The Contractor shall remove and reset all existing signs prior to performing any work that affects those signs. All signs damaged due to Contractor operations shall be replaced in kind or repaired by the Contractor at no cost to the project. An inventory of all existing signs shall be made with the Engineer prior to beginning the work. The Contractor shall not have equipment or materials in the lanes open to traffic at any time. The Contractor shall equip all vehicles with flashing amber lights visible from all directions. The Contractor shall not place tack coat on any surface where traffic will be forced to travel on fresh bituminous material. Traffic control devices shall not be stored on the shoulder or slopes of any roadway except hehind guardrail unless laid flat; nor shall traffic control devices be stored in any landscaped area unless otherwise designated or permitted. WORK HOUR RESTRICTIONS No work shall be performed at night or on Sunday. HOLIDAYS & SPECIAL EVENTS Work that interferes with traffic during special events, as determined by the Engineer, or any day of a three-day or four-day holiday weekend will not be permitted. CONSTRUCTION ACCESS Construction access to and from all roadways is prohibited unless approved by the Engineer or otherwise specified in the Contract. The Contractor shall prepare and submit a construction access plan as part of the method of handling traffic, which shall be approved by the Engineer prior to beginning work. This plan shall contain hut not be limited to a diagram showing the access to and from each affected roadway, location and duration of each signing and flagger position, and narrative explanation. The construction access plan shall address access to all of the areas of work. Access to all work areas will be limited to that which can be safely accomplished without hazard to traffic and which does not interfere with traffic during the times specified. Access will not be allowed to any work areas where such access requires the implementation of traffic control measures that interfere with the flow of traffic except where such implementation is in compliance with the working time limitations in the Contract. Unless otherwise included in the plans or directed by the Engineer, the Contractor shall maintain access to all roadways, road approaches and driveways at all times. The access maintenance plan required as part of the MHT in Subsection 630.08 shall be coordinated with all affected owners and tenants. The access approval signature of each affected owner or tenant shall be required. If the Contractor is unable to obtain approval and signatures, documentation of "good faith efforts" to obtain said approval and signatures shall be submitted. 19