Laserfiche WebLink
<br />5.1 Application Form - A completed application form provided by the State Engineer. This form <br />will be the only information normally available to the public before the project is approved for <br />construction. The application form shall be signed by the dam owner or an authorized <br />representative of the dam owner. The engineer responsible for the preparation of the design and <br />construction may not act as an authorized representative of the dam owner unless written <br />authorization for the engineer to act as the owners' representative is provided. <br /> <br />5.2 Construction Plans - Construction drawings or plans shall meet the following requirements: <br /> <br />5.2.1 The plans shall show the design of the dam and each appurtenant structure in <br />sufficient detail so that the contractor or builder is able to construct the proposed structure <br />from the plans and the specifications. <br /> <br />5.2.2 The front cover sheet of the plans shall have as a minimum, the name of the dam; the <br />county, Water Division and Water District in which the dam is located; and a list ofthe <br />drawings that follow the cover sheet. The construction drawings and plans shall display the <br />design engineer's seal (crimp type not acceptable) in accordance with current practice <br />defined by The Bylaws and Rules of Procedure of the State Board of Registration for <br />Professional Engineers and Professional Land Surveyors. The design engineer's certification <br />statement, the State Engineer's approval signature block, and the design engineer's AS- <br />CONSTRUCTED statement shall be located in the lower right quadrant of the cover sheet <br />in the following format: <br /> <br />Design engineer signature <br />Printed Name, Colo. P.E. No. XXXXX <br /> <br />Approved on the <br /> <br />day of <br /> <br />20 <br /> <br />State Engineer <br />By: <br /> <br />Deputy State Engineer <br /> <br />And, <br /> <br />These plans represent the AS-CONSTRUCTED conditions of <br />Dam to the best of our knowledge and judgement, based in part on information <br />furnished by others, as of the day of , 20_ <br /> <br />(Engineer's printed name) <br /> <br />(Signature) <br /> <br />5.2.3 Drawings filed with the State Engineer shall be originals, drawn with permanent ink <br />on high quality Mylar or equivalent, or a high quality reproducible archival copy ofthe <br />original, and shall be prepared in an appropriate scale so details are legible with an overall <br />size of24 inches high and 36 inches wide or 22 inches high and 34 inches wide. <br /> <br />10 <br />