Laserfiche WebLink
<br />~~ <br />Task 35 Alluvial Well Construction and Testing <br />Objective: <br />The ob3ective of this task is to construct and test 13 wells located in the South Platte Alluvium. <br />These wells will .provide hydrogeologic data for the alluvial ground water system in the Denver <br />Basin and the Lower South Platte Regions. <br />Discussion: <br />This is a continuation of the Phase. l& 2 field drilling program. Due to unexpected drilling <br />conditions and well pump capability, not ali wells were completed or tested during Phase 2. <br />Approach: <br />Task 35.4 Well Construction and Testing <br />• Review of the alluvial sand thickness of the remaining 3 wells will be completed and the wells <br />drilled and tested. <br />Deliverable: <br />Task 35.4 Alluvial Well Construction and Testing Technical Memorandum <br />• Complete the task. memoranda initiated under Phases 1 and 2 by including the wells drilled <br />under this task, following the same requirements outlined in Phase 2 Task 35.2 and 35.3. <br />Task 36 Construction and Testing of Bedrock Wells <br />Objective: <br />This task will construct and test one bedrock well located in the bedrock aquifers of the Denver <br />Basin Region. This well will provide hydrogeologic data for the Denver Bedrock ground water <br />system in the Denver Basin. <br />Discussion: <br />Due to unanticipated drilling conditions and complications, this bedrock well was not able to be <br />completed in Phase 2. <br />Approach: <br />SPDSS Groundwater SOW, Phase 3 '] <br />