Laserfiche WebLink
<br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br />I <br /> <br />4 <br /> <br />SAMPLING <br /> <br />In order to obtain physical evidence on the distribu- <br />tion of silver and indium in the snowpack three snow <br />sampling expeditions were conducted during the experimental <br />field season. <br /> <br />vertical snow profiles were collected at between 2 to <br />18 sampling sites during each trip. Each profile was <br />divided into 4 cm increments so that silver, indium and <br />water content could be measured with depth. Tables I and II <br />summarize the details of the sampling at the sites. Figures <br />1 and 2 indicate the locations of the sites. <br /> <br />Two snow sampling sites were established on the first <br />sampling trip, February 5 through 10, 1983. On February 6, <br />1983 a total of 42 samples were collected from sites <br />UTA-~rimmy Reed Flat and UTB-Kents Lake. These samples cover <br />snowfall from storms 1-7 (see Table III). This expedition <br />was intended to establish an additional seven new sampling <br />sites in the target area. Helicopter flight was made <br />impossible, however, by high wind velocities and low visibi- <br />lity associated with approaching storm No.8. The samp1in9 <br />crew remained in Beaver, Utah for two more days, but con- <br />ditions did not improve and were not forecast to improve so <br />continued sampling was not possible. At this time it was <br />decided to wait for improved weather conditions before <br />attempting another trip. <br /> <br />The second sampling trip was conducted February 16 <br />through 18, 1983, when weather conditions, acceptable for <br />sampling work, were forecast. A total of 152 samples were <br />