Laserfiche WebLink
II. Parcel Identification <br />A. Parcel Identification <br />Parcels shall normally be identified using the Parcel ID established by CDWR unless another <br />parcel identification system is approved by the Division Engineer. Mapping of approved <br />parcels and data collection by CDWR field staff while monitoring parcels will rely on the Parcel <br />ID to relate parcel information. The typical Parcel ID is in the format Township Number, Range <br />Number, Section Number and a two -digit field number (e.g. 21573607). <br />B. Physical Identification of Dry -up Parcels <br />1. Permanent Dry -up Parcels <br />For parcels that have been approved for dry -up for at least three consecutive years, or <br />that are intended for permanent removal of all types of irrigation, a sign shall be placed <br />in a prominent location near the most logical point of observation near a public road way <br />or the commonly used access point to the parcel. The sign shall be securely mounted <br />on a 4" x 4" or 6" by 6" timber post and shall be at least 9" wide by 12" high, made of <br />durable material, and with minimum 1" lettering. Signs shall state "Dry -Up Parcel ID <br />2. Temporary Dry -up Parcels <br />For parcels that are nominated for only temporary dry -up (less than three consecutive years), a <br />sign shall be placed in a prominent location near the most logical point of observation near a <br />public road way or the commonly used access point to the parcel. The sign shall be <br />securely mounted on a steel tee -post or 4" x 4" or 6" by 6" timber post and shall be at <br />least 12" wide by 6" high, made of durable material, and with minimum 1" lettering. <br />