Laserfiche WebLink
Page 3 of 3 <br />16. Volume IX, Figure 3: <br />a. The contours on the south side of Pond F are difficult to distinguish, and it is not clear where <br />the primary spillway pipe is located. Please revise the map to differentiate (either color or <br />line weight) the contours and pipelines on the south side of Pond F and clearly indicate the <br />location of the primary spillway pipe. <br />b. Please revise the map so that Culvert C -F4 is listed as a 30" culvert, consistent with the <br />design information provided by BRL. <br />c. Please revise the map so that the ditches listed with each cross section (ditch configuration <br />and lining) are consistent with the submitted designs (Ditch F16 and West Diversion #2 are <br />inconsistent.) <br />17. On Volume IX Figure 1 Section A -A', a cut slope had been shown on the version approved with <br />TR -76. That line has been removed from the current version. Unless that information was <br />somehow in error, please restore the line to this section. <br />18. On Volume IX Figure 1 Section D -D, please revise the label for the orange line to read <br />"Permitted Top of Pile (TR -76)" so that it is clear no changes are being proposed to this section <br />with TR -81. <br />19. On Volume IX Figure 1 Section E -E', the line colors vary from the system used on the other <br />sections. Although not required, it would be helpful to have the color scheme be consistent for <br />all of the sections. Please revise the label for the green line to read, "Permitted Top of Pile (TR- <br />76)" so that it is clear no changes are being proposed to this section with TR -81. <br />20. On Volume IX Figure 1 Section F -F, please revise the label for the purple line to read, <br />"Permitted Cut Slope (TR -76)" so that it is clear this slope is not being revised with TR -81. <br />21. In the Legend for Volume IX Figure 1, there is a solid black circle symbol referring to Lambert <br />sample locations. The circle does not appear on the map, and is no longer needed. Please <br />delete the sample location symbol from the legend. Please add a symbol for the piezometers. <br />If you have any questions or need additional information, please contact me. <br />Sincerely, <br />Susan L. Burgmaier <br />Environmental Protection Specialist <br />cc: Tamme Bishop, J.E. Stover & Associates <br />Marcia Talvitie, DRMS <br />