2013-07-24_HYDROLOGY - M2012032 - Laserfiche WebLink

Home Browse Search

ADZ Laboratories, Inc. 2773 Downhill Drive Steamboat Springs, CO 80487 (800) 334 -5493 Star Mine Operations LLC L12888 -05 WG346694 Silica, total WG346994 Chloride WG346890 Cyanide, total WG346903 Cyanide, WAD WG346650 Fluoride WG346196 Phosphorus, ortho dissolved M200.7 ICP SM4500CI -E SM4500CI -E M335.4 - Colonmetnc w/ distillation SM4500 -CN I- Colonmetricw/ distillation SM450OF -C M365.1 - Automated Ascorbic Add M365.1 - Automated Ascorbic Add M365.1 - Automated Ascorbic Add WG346565 Residue, Non - Filterable (TSS) @105C SM2540D WG346911 Sulfate D516- 02- Turbidimetric REPAD.15.06.05.01 ACZ Project ID: L12888 ZS Digestion procedures have the potential to trigger silica polymerization and precipitation, leading to low biased results. Silica chemistry is complex and polymerization kinetics are unpredictable. Dissolved and/or acid soluble silica analyses may provide more accurate measurements. Mt Matrix spike recovery was high, the recovery of the associated control sample (LCS or LFB) was acceptable. RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 1 Ox MDL). RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). M2 Matrix spike recovery was low, the recovery of the associated control sample (LCS or LFB) was acceptable. RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL). ZU Analysis date/time preceeds fitter date/time. A portion of sample was filtered and analyzed prior to the creation of a Filter workgroup. RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 1 Ox MDL). M3 The spike recovery value is unusable since the analyte concentration in the sample is disproportionate to the spike level. The recovery of the associated control sample (LCS or LFB) was acceptable. Page 40 of 45