2013-01-24_HYDROLOGY - M1977348 - Laserfiche WebLink

Home Browse Search

ADZ Laboratories, Inc. 2773 Downhill Drive Steamboat Springs, CO 80487 (800) 334 -5493 Inorganic Extended Qualifier Report Golder Associates ACZ Project ID: L97854 • L97854 -01 WG334288 Sodium, dissolved M200 7 ICP BB Target analyte detected in calibration blank at or above acceptance limit Sample value was > 10X the concentration in the calibration blank WG334551 Chloride M300 0 - Ion Chromatography DC Sample required dilution Non - target analyte exceeded calibration range M300 0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL) WG334369 Fluoride SM4500F -C RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL) WG334153 Nitrate /Nitrite as N, dissolved M353 2 - Automated Cadmium RA Relative Percent Difference (RPD) was not used for data Reduction validation because the sample concentration is too low for accurate evaluation (< 10x MDL) Nitrite as N, dissolved M353 2 - Automated Cadmium RA Relative Percent Difference (RPD) was not used for data Reduction validation because the sample concentration is too low for accurate evaluation (< 10x MDL) WG334202 pH SM4500H+ B ZW Method deviation The sample was centnfuged prior to analysis due to high solid content WG334204 Residue, Filterable (TDS) @180C SM2540C ZO Concentration is based on a final residue greater than 200 mg WG334202 Total Alkalinity SM2320B - Titration ZW Method deviation The sample was centrifuged prior to analysis due to high solid content L97854 -02 WG334551 Chloride M300 0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL) WG334369 Fluoride SM4500F -C RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL) WG334153 Nitrate /Nitrite as N, dissolved M353 2 - Automated Cadmium RA Relative Percent Difference (RPD) was not used for data Reduction validation because the sample concentration is too low for accurate evaluation (< 10x MDL) Nitrite as N, dissolved M353 2 - Automated Cadmium RA Relative Percent Difference (RPD) was not used for data Reduction validation because the sample concentration is too low for accurate evaluation (< 10x MDL) WG334204 Residue, Filterable (TDS) @180C SM2540C ZO Concentration is based on a final residue greater than 200 mg WG334551 Sulfate M300 0 - Ion Chromatography DC Sample required dilution Non - target analyte exceeded calibration range L97854 -03 WG335659 Chloride M300 0 - Ion Chromatography RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL) WG334369 Fluoride SM4500F -C RA Relative Percent Difference (RPD) was not used for data validation because the sample concentration is too low for accurate evaluation (< 10x MDL) WG334153 Nitrate /Nitrite as N, dissolved M353 2 - Automated Cadmium RA Relative Percent Difference (RPD) was not used for data Reduction validation because the sample concentration is too low for accurate evaluation (< 10x MDL) Nitrite as N, dissolved M353 2 - Automated Cadmium RA Relative Percent Difference (RPD) was not used for data Reduction validation because the sample concentration is too low for accurate evaluation (< 10x MDL) WG334551 Sulfate M300 0 - Ion Chromatography DC Sample required dilution Non - target analyte exceeded calibration range REPAD 15 06.05 01 Page 21 of 34