Laserfiche WebLink
ameO <br />supplied by Chevron Phillips Chemical Company to verify material properties prior to <br />geomembrane manufacture. The QC certificates provided by the resin manufacturer are <br />presented in Appendix 1.3. <br />5.2.2 Roll QC Certificates <br />Lone Star provided QC certificates for each roll (approximately every 10,000 square feet) of <br />LLDPE geomembrane used for the project, exceeding the required minimum frequency of <br />one per 50,000 square feet of geomembrane. AMEC reviewed the QC certificates to verify <br />conformance of the geomembrane to the project requirements. Geomembrane was placed <br />only when complete QC documentation was provided and AMEC determined that test <br />results met or exceeded project specifications. The geomembrane roll QC certificates are <br />presented in Appendix 1.4. <br />5.2.3 Welding Rod QC Certificates <br />Welding rod certification consisted of QC documents for the resin used to manufacture the <br />welding material for the Cresson Project. The welding material used on this project was <br />produced from five (5) batches of resin. AMEC's review of the QC certification indicates that <br />the resin used to manufacture the welding material met project specifications. The welding <br />rod QC certificates are presented in Appendix 1.5. <br />AMEC Environment & Infrastructure, Inc. <br />2000 S. Colorado Blvd 2 -1000 <br />Denver, CO 80222 <br />Tel 303 - 935 -6505 <br />Fax 303 - 935 -6575 www.amec.com <br />IN <br />