Laserfiche WebLink
ameO <br />3.0 GEOSYNTHETICS INSTALLATION <br />Geosynthetics installed in the Phase 5 Berm Modification consisted of geomembrane. The <br />Phase 5 Berm Modification liner system included 80 -mil double -sided textured LLDPE <br />geomembrane manufactured by GSE Environmental of Houston, Texas. <br />3.1 Phase 5 Berm Modification Liner System <br />Geomembrane installation activities for the Phase 5 Berm Modification liner system included <br />deployment, seaming, non - destructive testing, and destructive testing of 80 -mil double -sided <br />textured LLDPE geomembrane to project specifications. Lone Star deployed panels P1 <br />through P25 as part of the primary liner system in the certified area (approximately 18,797 <br />square feet), as shown on Figure 2. <br />Geomembrane was placed on compacted and approved SLF as part of the Phase 5 Berm <br />Modification. Record Drawing No. 3 of 3 in Appendix A presents the Phase 5 Berm <br />Modification geomembrane panel layout for the primary geomembrane layer. Ames <br />anchored geomembrane at the limits of the Phase 5 Berm Modification. The anchor trench <br />is a minimum of 3 feet deep by 1 foot wide. <br />AMEC Environment & Infrastructure, Inc. <br />2000 S. Colorado Blvd 2 -1000 <br />Denver, CO 80222 <br />Tel 303 - 935 -6505 <br />Fax 303 - 935 -6575 www.amec.com <br />10 <br />