Laserfiche WebLink
SECTION 02778.0 GEOCELL <br />PART 1: GENERAL <br />1.01 SUMMARY <br />1.05 DELIVERY, STORAGE, AND HANDLING <br />A. Packing and Shipping: <br />1. Labels on each roll delivered to Site shall identify the following: <br />Section 02778 <br />Geocell <br />Page 1 of 5 <br />ame0 <br />This SPECIFICATION describes requirements for the manufacture, fabrication (if needed), supply, and <br />installation of geocell for erosion control, as shown on the DRAWINGS; and construction quality control <br />monitoring and testing. All procedures, operations, and methods shall be in strict compliance with the <br />SPECIFICATIONS, Construction Quality Assurance Plan, and the DRAWINGS. <br />1.02 REFERENCES <br />A. ASTM D1505 — Standard Test Method for Density of Plastics by the Density- Gradient Technique. <br />B. ASTM D1603 — Standard Test Method for Carbon Black Content in Olefin Plastics. <br />C. ASTM D1693 — Standard Test Method for Environmental Stress - Cracking of Ethylene Plastics. <br />D. ASTM D5199 — Standard Test Method for Measuring the Nominal Thickness of Geosynthetics. <br />E. US Army Corps of Engineers (USACE) Technical Report GL- 86 -19, Appendix A. <br />1.03 SUBMITTALS <br />CONTRACTOR shall provide the following information relating to the geocell MANUFACTURER and <br />INSTALLER prior to commencement of the WORK: <br />A. Information from the MANUFACTURER including company name, address, telephone number, and <br />the names of the company president and quality control manager. <br />B. Quality Control Manuals from the MANUFACTURER for the installation and testing of the geocell. <br />C. Quality Control Certificates from the MANUFACTURER. <br />1.04 QUALITY ASSURANCE <br />A. All work shall be constructed, monitored, and tested in compliance with the requirements of the <br />Construction Quality Assurance Plan (Section 01400.2). CONTRACTOR and <br />MANUFACTURER shall participate in and comply with all items in these SPECIFICATIONS and <br />requirements of the CQA plan. <br />June 4, 2012 <br />Revision 0 <br />