Laserfiche WebLink
3.08 DAMAGE REPAIR <br />ame0 <br />A. If the GCL is damaged (pre - hydrated, torn, punctured, perforated, etc.) during installation, it may be <br />possible to repair it by cutting a patch to fit over the damaged area. The patch shall be obtained from <br />a new GCL roll and shall be cut to size such that a minimum overlap of twelve (12) inches is <br />achieved around all of the damaged area. Granular bentonite or bentonite mastic should be applied <br />around the damaged area prior to placement of the patch. It may be desirable to use an adhesive to <br />affix the patch in place so that it is not displaced during cover placement. <br />** *END OF SECTION * ** <br />Section 02776.1 Page 7 of 7 <br />Geosynthetic Clay Liner (GCL) <br />June 19, 2012 <br />Revision 1 <br />