2012-11-02_PERMIT FILE - C1981035A ‎(4)‎

• Permit No: C1981035A
• IBM Index Class Name: Permit File
• Doc Date: 11/2/2012
• Doc Name: Licenses and Permits
• Section_Exhibit Name: KII Appendix 02 Licenses and Permits
• Media Type: D
• Archive: Yes

GCC Energy, LLC Colorado Department of Public Health and Environment
Permit No. 11 LP3252 Air Pollution Control Division
Initial Approval
Within one hundred and eighty days (180) after issuance of this permit, the AIRS ID number
shall be marked on the subject equipment for ease of identification. (Reference: Regulation No.
3, Part B, III.E.) (State only enforceable)
4. Visible emissions shall not exceed twenty percent (20 %) opacity during normal operation of the
source. During periods of startup, process modification, or adjustment of control equipment
visible emissions shall not exceed 30% opacity for more than six minutes in any sixty
consecutive minutes. Opacity shall be measured by EPA Method 9. (Reference: Regulation
No. 1, Section II.A.1. & 4.)
Within one hundred and eighty days (180) after issuance of this permit, the applicant shall
submit to the Division for approval an operating and maintenance plan for all control equipment
and control practices, and a proposed recordkeeping format that will outline how the applicant
will maintain compliance on an ongoing basis with the requirements of the "EMISSION
LIMITATIONS AND RECORDS" section listed below. The operating and maintenance plan
shall commence at startup. (Reference: Regulation No. 3, Part B, Section III.G.7.)
6. Upon self certification the conditions and equipment descriptions shall be incorporated
in permit 09LP0202F. This permit shall be cancelled.
EMISSION LIMITATIONS AND RECORDS FOR THE CRUSHER
Emissions of air pollutants shall not exceed the following limitations (as calculated using the
emission factors included in the Notes to Permit Holder section of this permit). Hourly records of
the actual emission rates shall be maintained by the applicant and made available to the
Division for inspection upon request. (Reference: Regulation No. 3, Part B, Section II.A.4)
Emission Limits:
AIRS Point
010
Pollutant
Tons per
Year
PM
0.7
PM10
0.3
[_ PM2.5
0.1
8. Spray bars shall be used if material moisture content is insufficient to control particulate
emissions.
PROCESS LIMITATIONS AND RECORDS
9. This source shall be limited to the following maximum consumption, processing and /or
operational rates as listed below. Annual records of the actual process rate shall be maintained
by the applicant and made available to the Division for inspection upon request. (Reference:
Regulation 3, Part B, ILAA)
AIRS ID: 067/11031010 Page 2 of 7