Laserfiche WebLink
Parameter <br />chloride (mg /1)(meq /1) <br />sulfate (mg /1)(meq /1) <br />calcium (mg /1) (meq /1) <br />magnesium (mg /1)(meq /1) <br />sodium (mg /1)(meq /1) <br />potassium (mg /1)(meq /1) <br />fluoride (mg /1)(meq /1) <br />nitrate plus nitrate as N <br />(total) <br />orthophosphate as P (total) <br />aluminum (AI) (Mg /1) <br />cadmium (Cd) <br />chromium (Cr) <br />copper (Cu) <br />iron (Fe) <br />lead (Pb) <br />manganese (Mn) <br />selenium (Se) <br />vanadium (V) <br />zinc (Zn) <br />Sodium Adsorption Ratio <br />rill be calculated <br />Procedure <br />Silver nitrate; mercuric nitrate; <br />automated colorimetric- ferricyanide. <br />Cravimetric; turbidimetric; auto- <br />mated calorimetric- barium chloranilate <br />EDTA titration; <br />Atomic absorpti <br />Flame <br />Atomic a <br />photometr <br />Distillation -- SPADNS <br />atomic a sorption <br />av tric <br />c baorption <br />colorimetric; flame <br />Automated (cadmium reduction); auto- <br />mated (hydrazine reduction) <br />Direct single reagent; automated <br />single reagent or stannous chloride. <br />Atomic absorption <br />Atomic absorption <br />Atomic absorption <br />Atomic absorption <br />Atomic absorption <br />Atomic absorption <br />Atomic absorption <br />Atomic absorption <br />Atomic absorption <br />Atomic absorption <br />Variations in water quality analyses collected on one day at the two <br />locations in an aquifer greater than 25 percent will require that addi- <br />tional samples be collected and analyzed and, possibly that additional <br />drill holes be installed and sampled to provide adequate information to <br />explain the variations. <br />/TIE. An Inventory of all Existing Wells and Springs within 8 km of the area <br />of operations shall be prepared in tabular form and locations shown on a <br />map with a scale of 1:24,000. The following information shall be in- <br />cluded: location, indicated condition of well (casing, completion, <br />observed situations that could explain unusual data), surface owner, <br />water use, land surface elevation, well depth, aquifer(s), depth to <br />static water level, method of water production, water level during <br />pumping, discharge and any existing water quality data (and source of <br />Water quality data). <br />